V-Neck Three-Quarter Sleeve Belted Dress

Fabric & Materials

Fabric recommendations: dress fabrics made of natural or blended fibers. YOU WILL ALSO NEED: fusible interfacing; concealed zipper; buckle.

CUTTER'S MUST

IF THE PATTERNS HAVE A DOUBLE CONTOUR, THEY INCLUDE SEAM ALLOWANCES. IF THE CONTOUR IS SINGLE, THE PATTERNS DO NOT INCLUDE SEAM ALLOWANCES. SEAM ALLOWANCES: all seams 1 cm; hem allowance for the dress bottom — 1.2 cm. ATTENTION! FIRST OF ALL, PRINT OUT THE PAPER PATTERNS AND LAY THEM OUT ON THE FABRIC WIDTH (fabric width can be from 90cm to 150cm) TO DETERMINE HOW MUCH MATERIAL YOU WILL NEED (do not forget to account for paired and symmetrical details). WHEN STITCHING PIECES, PAY ATTENTION TO THE NOTCHES - THEY MUST MATCH!

• From main fabric:
  • Upper center back part - 2 pieces
  • Upper side back part - 2 pieces
  • Lower back part – 2 pieces
  • Upper center front part - 2 pieces
  • Upper side front part - 2 pieces
  • Lower front part - 1 piece on fold
  • Sleeve – 2 pieces
  • Cuff – 4 pieces
  • Front facing — 2 pieces
  • Back neckline facing — 1 piece
  • Belt — 1 piece
• From fusible interfacing:
  • Front facing — 2 pieces
  • Back neckline facing — 1 piece
  • Cuff – 2 pieces

Sewing Instructions

1. Fuse interfacing to the designated pieces.
2. Stitch the princess seams of the upper back, press allowances towards the center and serge. Stitch the upper and lower back parts, press allowances upwards and serge.
3. Serge the center back edges separately. Stitch the center back seam from the zipper mark to the bottom, press allowances open. Insert the concealed zipper.
4. Stitch the princess seams of the front, press allowances towards the center and serge. Stitch the center front seam from the mark to the bottom, press allowances open and serge.
5. Stitch shoulder seams, clip allowances at curves, press open and serge.
6. Stitch the center seam of the front facings from the mark to the bottom, press allowances open. Stitch the shoulder seams of the front facings and back neckline facing, clip allowances at curves and press open. Serge the outer edges.
7. Place the back neckline facing and front facings with the upper garment right sides together and stitch the back neckline and front neckline. Clip allowances, turn facing and facings to the wrong side, press.
8. Stitch the upper and lower front parts, press allowances downwards and serge.
9. Stitch side seams, press allowances towards the back and serge.
10. Attach the outer cuff to the sleeve, press allowances downwards. Stitch sleeve seams, press allowances and serge. Set sleeves into armholes, press allowances and serge.
11. Stitch the inner cuff into a loop, serge the upper edge. Place the inner cuff with the sleeve and stitch the lower edge. Fold the inner cuff to the wrong side, straighten, press and topstitch into the seam of the outer cuff attachment.
12. Serge the bottom edge, press to the wrong side and topstitch.
13. Fold the belt in half lengthwise, right sides together, and stitch along the long and short sides. Turn the belt right side out, press. Serge the short side. Topstitch around the perimeter at 0.7 cm. Thread and secure the buckle on the serged side of the belt. Punch holes.