Trimmed Neck Blouse with Bloused Hem
Introducing a relaxed-fit women's blouse pattern, distinguished by its unique neckline trim extending over the shoulders and a stylish bloused hem.
When To Wear
This comfortable and chic blouse is perfect for a variety of casual to semi-casual settings:
- Casual Chic: An elevated everyday piece, ideal for pairing with jeans or skirts for a stylish yet comfortable look.
- Warm Weather Style: Its lightweight fabric and short sleeves make it a perfect choice for spring and summer outings.
- Relaxed Gatherings: Suitable for brunches, casual dinners, or social events where comfort meets understated elegance.
Key Design Features
Silhouette: a relaxed, loose-fitting body with a gentle bloused effect at the hem.
Neckline & Shoulder: Features a wide boat neck with a decorative trim that extends from the neckline seam over distinct shoulder panels.
Front: Includes subtle pleats near the lower front, contributing to the blouse's relaxed drape and volume.
Sleeves: Short, easy-fitting sleeves finished with stitched cuffs.
Hem: Defined by a fabric band, elasticated and shirred at the back, to create a comfortably bloused silhouette.
Level Of Difficulty
Intermediate. Requires skills in applying fusible interfacing, creating pleats, working with decorative trim, and sewing with elastic thread for shirring.
Fabric Recommendations
For the best drape and comfort, choose lightweight blouse fabrics with a soft hand:
- Thin blouse fabrics made from natural or blended fibers
Additional Supplies
- Fusible interfacing
- Decorative trim (approximate length indicated on pattern piece)
- Elastic thread
Cutter's Must
If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: all seams 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need. When stitching pieces, pay attention to the notches - they must match!
- From main fabric:
- Front – 1 piece on fold
- Back – 1 piece on fold
- Insert – 2 pieces
- Cuff – 2 pieces
- Back waistband – 1 piece
- Front waistband – 1 piece
- From fusible interfacing:
- Cuff – 2 pieces
- Front waistband – 1 piece
Sewing Instructions
- Fuse interfacing to the designated pieces.
- Fold and stitch the pleats on the front from the bottom edge along the marked lines, press the pleat depths towards the center.
- Overlock the neckline edge of the insert, press to the wrong side and topstitch. Topstitch decorative trim along the neckline edge.
- Attach the insert to the back, press seam allowances towards the back, overlock. Topstitch the back neckline section between the marks. Attach the insert to the front, simultaneously stitching the upper sleeve seam. Press seam allowances towards the front and overlock. Topstitch the front neckline section between the marks. Topstitch decorative trim onto the back and front along the neckline and the upper sleeve seam.
- Stitch the side seams simultaneously with the sleeve seam, press seam allowances towards the back and overlock.
- Stitch the cuff into a loop, press seam allowances open. Fold the cuff lengthwise in half, right side out, and press. Attach the outer side of the cuff to the lower edge of the sleeve, press seam allowances upwards. Press the seam allowance of the inner cuff edge to the wrong side and topstitch into the attachment seam.
- Stitch the back and front waistbands together, press seam allowances open. Fold the waistband lengthwise in half, right side out, and press. Attach the waistband to the bottom of the garment, press seam allowances upwards and overlock. Topstitch parallel decorative stitches with elastic thread around the perimeter of the back waistband.
