Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A women's fitted midi dress with a V-neck, a gathered upper front set into shaped double-layer shoulder yokes, a wide waist inset front and back, and a six-panel lower part that flares towards the hem. Short sleeves gathered at the cap and a concealed zipper in the centre back seam. Drafted to your own measurements. Recommended fabric: dress fabrics made from natural or blended fibres.
A women's fitted midi dress with a V-neck, a gathered upper front set into shaped double-layer shoulder yokes, a wide waist inset front and back, and a six-panel lower part that flares towards the hem. Short sleeves gathered at the cap and a concealed zipper in the centre back seam.
Silhouette: Close-fitting through the bust, waist and hips; the panels flare out in the lower part of the skirt.
Length: Midi, below the knee.
Neckline: V-neck at the front, finished with a facing; a high round neckline at the back with a back neck facing.
Sleeves: Short set-in sleeves, gathered at the cap.
Front: The upper front is one piece, gathered along the top edge into the front yokes and along the lower edge into the front inset. Each front yoke is cut double and stitched with the upper front between the layers.
Waist: A wide inset band at the natural waist on the front and on the back.
Skirt: The lower front has a centre panel and two side panels; the lower back has two centre panels and two side panels. The princess seams run from the waist inset to the hem.
Back: Upper back in two halves shaped with darts; centre back seam with a concealed zipper.
Finishing: Fusible interfacing on the neckline facings; the hems of the dress and sleeves are turned up and topstitched.
Intermediate. Gathers set into a double-layer yoke and a waist inset, princess seams in a multi-panel skirt, a V-neck facing clipped at the point and a concealed zipper.
Dress fabrics made from natural or blended fibres.
If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: hem allowance and sleeve hem allowance - 1.5 cm, other seams 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need. When stitching pieces, pay attention to the notches - they must match!

#4747
Notched Collar Dress with Wrap Bodice

#4746
Asymmetrical Button Front Sleeveless A-line Dress
#4752
Fitted Boat Neck Dropped Shoulder Dress

#4745
Square Neck Sheath Dress with Buttons
#4753
Square Neck Sheath Dress Wrap Waist

#4744
Collared Faux Wrap 3/4 Sleeve Dress

#4743
Ruffled Cold Shoulder Sheath Dress

#4742
Hooded Dress with Side Pockets

Minerva Support
Online