Lace Trimmed Ruffle V-Neck Blouse
This sophisticated blouse pattern features a charming V-neck, elegant lace trim, and a dramatic two-tier flounce that cascades over the shoulders of this sleeveless design.
When To Wear:
- Smart Casual Gatherings: Perfect for a polished yet relaxed look at brunches or daytime events.
- Office & Business Casual: Elevate your professional wardrobe with a touch of feminine charm.
- Evening & Social Events: a stylish choice for dinners, parties, or cultural outings.
Key Design Features
Silhouette: a tailored, fitted blouse silhouette with flattering princess seams at the front and back, finished at the hem with a buttoned lower band.
Neckline: a sophisticated V-neckline at the front, edged with a placket and framed by a lace yoke band. The back features a rounded neckline with a matching lace yoke band.
Closure: a functional center front button placket that continues around the neckline, secured with six buttons (including one on the lower band).
Sleeves: Sleeveless; the armholes are finished with bias binding, while the two-tier flounce falls over the shoulders like a cap, adding volume and movement.
Details: Decorative patterned lace forms the distinctive front and back yokes, complemented by two layered gathered flounces with rolled-hem edges, set into the seam below the lace.
Level Of Difficulty
Intermediate. This pattern requires skills in working with delicate fabrics like lace, gathering flounces, binding armholes, constructing a clean button placket, and assembling princess seams.
Fabric Recommendations
Choose lightweight blouse fabrics with good drape, along with a coordinating lace for the yoke:
- Blouse fabrics made from natural or blended fibers
- Lace fabric in a coordinating color
Additional Supplies
- Fusible interfacing
- 6 buttons
Cutter's Must
If the patterns have a double contour, seam allowances are included. If the contour is single, the patterns are without seam allowances. Seam allowances: allowance along the outer edges of the ruffles – 0 cm, other seams – 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (do not forget to account for paired and symmetrical details).
- From main fabric:
- Center Back – 2 pieces
- Side Back – 2 pieces
- Center Front – 2 pieces
- Side Front – 2 pieces
- Back Placket – 2 pieces
- Front Placket – 4 pieces
- Bigger Flounce – 1 piece on fold
- Smaller Flounce – 1 piece on fold
- Lower Placket – 1 piece
- From lace:
- Front Lace – 2 pieces
- Back Lace – 1 piece
- From fusible interfacing:
- Front Placket – 2 pieces
- Back Placket – 1 piece
- Lower Placket – 1 piece
Sewing Instructions
When stitching pieces, pay attention to the notches - they must match!
- Fuse interfacing to the relevant pieces.
- Stitch the center back seam. Overlock the allowance and press it to the left side. Stitch the back princess seam. Overlock the allowances and press them towards the center.
- Stitch the front princess seams. Overlock the allowances and press them towards the center.
- Stitch the side and shoulder seams, press allowances towards the back and overlock.
- Finish the outer edges of the flounces with a narrow rolled hem on the overlocker. Place the Smaller Flounce on the Bigger Flounce, wrong side to right side, and secure along the long edge. Stitch with a loosened top thread and gather.
- Stitch the shoulder seams of the Back Placket and Front Placket, press allowances open. Stitch the shoulder seams of the Front Lace and Back Lace, press allowances open. Attach the plackets to the lace. Press allowances towards the plackets. Attach the lace pieces to the front and back, inserting the flounces. Overlock allowances and press them towards the lace.
- Place the inner plackets on the outer ones and stitch along the outer edge. Clip allowances at curves, turn the piece right side out, smooth, and press. Fold the allowances of the inner plackets inwards and topstitch into the seam of the upper plackets.
- Cut (if not ready-made) a bias binding 4 cm wide and a length equal to the armhole length + 5 cm. Fold the bias binding in half lengthwise, right side out, and press. Place the binding with the armhole edge, right sides together, and stitch. Clip allowances. Fold the binding to the wrong side and topstitch along the fold to the main piece. Press the seam.
- Stitch the Lower Placket to the blouse. Press the allowance downwards. Stitch the ends of the placket, turn right side out. Fold the inner allowance inwards and topstitch into the attaching seam.
- Make buttonholes on the right placket. Sew buttons on the left placket.
