Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4638
#4640

Asymmetric Front Coat

Pattern #4639

A women's lined cocoon coat above knee length, with a high stand collar cut in one with the body, a wrap-over front whose edge curves round to the hem, and three-quarter set-in sleeves. The closure is on the inside, with four buttons. Drafted to your own measurements. Recommended fabric: coating fabrics from natural or blended fibres.

Tech. Description

Asymmetric Front Coat

A women's lined cocoon coat above knee length, with a high stand collar cut in one with the body, a wrap-over front whose edge curves round to the hem, and three-quarter set-in sleeves. The closure is on the inside, with four buttons.

When To Wear

  • In spring and autumn over dresses, straight skirts or narrow trousers.
  • With long gloves or a fine knit underneath, since the sleeves stop below the elbow.

Key Design Features

Silhouette: Cocoon shape: roomy through the body and narrowing at the hem, shaped by darts on the fronts and back.

Length: Above the knee.

Collar: High stand collar cut in one with the fronts and back, finished with the front facings and back neck facing.

Front: The right front wraps over the left; its edge runs diagonally from the collar and curves into a rounded hem.

Closure: Four buttons on the inside, with no buttons showing on the outside.

Sleeves: Three-quarter set-in sleeves with an eased cap, finished at the lower edge with a separate sleeve facing.

Back: Centre back seam and darts.

Pockets: None.

Lining: Full lining including sleeves, cut minus the width of the back neck facing and sleeve facings and sewn to the hem; 2.5 cm hem allowance.

Level Of Difficulty

Intermediate. A cut-on stand collar finished with facings, a curved front edge, faced sleeve hems and a bagged lining turned through the sleeve seam.

Fabric Recommendations

Coating fabrics from natural or blended fibres.

Additional Supplies

  • Lining fabric
  • Fusible interfacing (front facings, back neck facing)
  • 4 buttons

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: all seams 1 cm; hem allowance for the coat bottom – 2.5 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90cm to 150cm) to determine how much material you will need (do not forget to account for paired and symmetrical details). When stitching pieces, pay attention to the notches - they must match!

From main fabric:

  • Back - 2 pieces
  • Front - 2 pieces
  • Front facing - 2 pieces
  • Back neckline facing – 1 piece
  • Sleeve – 2 pieces
  • Sleeve facing – 2 pieces

From lining fabric:

  • Back - 2 pieces
  • Front lining - 2 pieces
  • Sleeve – 2 pieces

From fusible interfacing:

  • Front facing - 2 pieces
  • Back neckline facing – 1 piece

Attention! Lining pieces are cut deducting the width of the back neckline facing and sleeve facing.

Sewing Instructions

  1. Fuse interfacing to the designated pieces.
  2. Stitch darts on the front, press allowances towards the center.
  3. Stitch the center back seam. Press allowances open. Stitch darts on the back. Press allowances towards the center.
  4. Stitch side and shoulder seams. Press allowances open.
  5. Machine buttonholes on the right front facing. Stitch shoulder seams of front facings and back neckline facing. Press allowance open.
  6. Place the front facing on the right side of the front, right sides together, pin and stitch along the front edge and neckline. Turn out the front edges and facing, straighten the seams.
  7. Stitch and press open the sleeve seam. Stitch and press open the sleeve facing seam. Place sleeve and sleeve facing right sides together and stitch along the lower edge. Turn the facing inwards and press. Set sleeves into armholes matching notches, easing the sleeve cap.
  8. On the lining fabric pieces, stitch seams and set sleeves, leaving an opening in the front left sleeve seam.
  9. Stitch the lining to the inner edges of the front facings and the back neckline facing.
  10. Stitch the lining to the bottom edge of the garment and the sleeve facing. Turn the coat right side out through the opening. Close the opening.
  11. Machine buttonholes on the left front. Sew buttons onto the right front from the front facing side.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?