Cropped Wrap Front Bolero

Cropped Wrap Front Bolero

Introducing a bolero jacket pattern for a cropped, close-fitting silhouette featuring a sculptural wrap collar, clean front closure, and softly contoured shaping.

When To Wear

This bolero is designed as a refined layering piece, suitable for:

Evening & Occasion Wear
An elegant complement to dresses, enhancing the neckline while providing light coverage.

Formal Styling
Ideal for structured outfits where a cropped jacket adds polish without overwhelming the silhouette.

Layered Contemporary Looks
Perfect for pairing with fitted garments to create contrast between volume and structure.

Key Design Features

Silhouette
Fitted, cropped bolero designed to sit above the waist, emphasizing the upper body and neckline.

Collar
High stand-up collar that continues the wrapped front edges and crosses over at the neck, forming a sculptural frame.

Closure
Discrete front fastening using hooks and eyes, maintaining a clean, uninterrupted front.

Sleeves
Long raglan sleeves shaped with a shoulder dart, with interfaced hems.

Front Design
Curved, overlapping front panels creating a wrap effect across the bust, fastened inside with two hooks and eyes.

Back
Clean, minimal back cut in one piece on the fold, with a hem facing.

Level Of Difficulty

Intermediate to Advanced.
Requires precision in collar construction, clean finishing of facings, and accurate shaping of the cropped silhouette.

Fabric Recommendations

Choose fabrics that support structure and clean shaping:

Suiting fabrics from natural or blended fibers

These materials maintain the sculptural form of the collar while ensuring a refined finish.

Additional Supplies

• Fusible interfacing
• Raglan shoulder pads
• 2 hook-and-eye fasteners

Cutter’s Must

From Main Fabric:

• Back – 1 piece on fold
• Front – 2 pieces
• Sleeve – 2 pieces
• Collar – 2 pieces
• Back Neckline Facing – 1 piece
• Center Front Facing – 2 pieces
• Back Hem Facing – 1 piece

From Fusible Interfacing:

• Center Front Facing – 2 pieces
• Back Neckline Facing – 1 piece
• Upper Collar – 1 piece
• Back Hem Facing – 2 pieces
• Also interface the sleeve hem allowances

Assembly Instructions

1. Interfacing

Apply fusible interfacing to the required pieces.

2. Sleeve Dart

Stitch the dart on the Sleeve, trim the dart intake to 1 cm, and press open.

3. Sleeves and Side Seams

Attach the back part of the Sleeve to the Back, press the seam allowances open.

Attach the front part of the Sleeve to the Front, press the seam allowances open.

Stitch the underarm sleeve seams and the side seams in one continuous seam, press the seam allowances open.

4. Facings

Stitch the shoulder seams of the Back Neckline Facing and the Center Front Facing, press the seam allowances open.

Attach the Back Hem Facing to the Center Front Facing, press the seam allowances open.

5. Collar

Attach the upper Collar to the neckline of the Back and Front, and the under Collar to the neckline of the Back Neckline Facing and Center Front Facing.

Press the seams open.

6. Assembly

Place the Center Front Facing and the Front right sides together and stitch along the front edge, collar, and lower edge.

Trim the seam allowances at the corners, turn right side out and shape.

Press the collar and front edges.

Stitch the collar seam allowances together along the collar attachment seam to hold the layers in place.

Attach the Back Hem Facing to the Back with blind stitches.

7. Shoulder Pads

Sew in shoulder pads.

8. Closures

Sew hooks and eyes onto the outer and inner Front.