Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4471
#4473

Elbow Sleeve Rounded Collar Sheath Dress

Pattern #4472

A knee-length women's sheath dress with a rounded flat collar, a seam under the bust, elbow-length sleeves cut in one with the bodice and completed by an inserted underarm section, and a centre back zipper with a vent. The bodice is lined. Drafted to your own measurements. Recommended fabric: soft, pliable dress fabrics of natural or blended fibres.

Tech. Description

Elbow Sleeve Rounded Collar Sheath Dress

A knee-length women's sheath dress with a rounded flat collar, a seam under the bust, elbow-length sleeves cut in one with the bodice and completed by an inserted underarm section, and a centre back zipper with a vent. The bodice is lined.

When To Wear

  • At the office and for business meetings, with tights and pumps.
  • For daytime events in spring and autumn.

Key Design Features

Silhouette: Fitted sheath shaped by waist darts in the bodice and skirt.

Length: Knee length.

Collar: Rounded flat collar of two layers, one interfaced, with the ends meeting at the centre front; set between the dress and the lining.

Sleeves: Cut in one with the upper front and upper back, joined by a seam along the top of the arm; a separate lower sleeve section is set into slashes in the bodice. Elbow length on the drawing, faced with lining at the lower edge.

Front: Upper front in two pieces with a centre front seam, joined under the bust to a lower front cut on the fold.

Back: Upper and lower back joined by a horizontal seam; centre back seam with an invisible zipper and a vent at the hem.

Finishing: Hem turned up 2 cm and sewn by hand with blind stitches; underarm areas interfaced.

Lining: Lined bodice and lower sleeves; the lining is sewn to the zipper tape and the waist seam allowance.

Level Of Difficulty

Intermediate. Setting a sleeve section into slashes in the bodice, a collar sandwiched between dress and lining, a back vent and an invisible zipper.

Fabric Recommendations

Soft, pliable dress fabrics of natural or blended fibres.

Additional Supplies

  • Lining fabric
  • Fusible interfacing (collar, underarm areas)
  • Invisible zipper

Cutter's Must

From main fabric:

  • Upper Back – 2 pieces
  • Lower Back – 2 pieces
  • Upper Front – 2 pieces
  • Lower Front – 1 piece on fold
  • Lower Sleeve – 2 pieces
  • Collar – 2 pieces

From lining fabric:

  • Upper Back – 2 pieces
  • Upper Front – 2 pieces
  • Lower Sleeve – 2 pieces

From fusible interfacing:

  • Collar – 1 piece

Sewing Instructions

  1. Fuse interfacing to one Collar piece. Also interface the underarm areas of the Upper Back and Upper Front pieces, in both the main fabric and the lining.
  2. Stitch the waist darts on the upper and lower back and front pieces. On the upper pieces, trim the darts to 1 cm and serge. Press the darts towards the centre of the pieces.
  3. Stitch the Upper Back to the Lower Back, press the seam allowances upwards and serge. Interface the vent area on both back pieces from the wrong side. Serge the centre back edges of each piece separately. On the right side, mark the centre back seam line (the vent fold line). Stitch the centre back seam from the neckline to the first mark and from the second mark to the vent corner. Clip the seam allowance at the vent corner. Press the centre back seam allowances open and press the vent to the left side. Press the right vent edge 1 cm to the wrong side and topstitch. Machine-stitch the vent allowances to the dress. Insert the invisible zipper.
  4. Stitch the Upper Front to the Lower Front, press the seam allowances upwards and serge.
  5. Slash the Upper Back between the marked lines for the Lower Sleeve. Stitch the Lower Sleeve to the back part of the sleeve. Slash the Upper Front between the marked lines for the Lower Sleeve. Stitch the Lower Sleeve to the front part of the sleeve. Stitch the side seams, press the seam allowances towards the back and serge.
  6. Stitch the seam along the top of the sleeve and press the seam allowances open.
  7. Place the Collar pieces right sides together and stitch along the outer edge. Clip the seam allowances on the curves. Turn the collar right side out, ease out the edge and press. Stitch the collar to the neckline, matching the marks.
  8. Sew the lining pieces together in the same way as the dress. Serge the lower edge and the centre back edges. Place the lining on the dress, right sides together, and stitch around the neckline (the collar lies between the lining and the dress). Turn the lining to the inside. Stitch the lining to the lower edge of the sleeves. Hand-stitch the lining to the zipper tape and to the waist seam allowance.
  9. Serge the hem allowance of the dress, press it to the wrong side and hem with blind stitches.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?