Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A knee-length women's dress for knit fabric with a raised waist seam, a pleated upper front, slanted pockets in the lower front and three-quarter sleeves gathered into cuffs. A tie band crosses the front at the waist seam and ties at the back. Drafted to your own measurements. Recommended fabric: medium-stretch knit fabric of natural or blended fibres.
A knee-length women's dress for knit fabric with a raised waist seam, a pleated upper front, slanted pockets in the lower front and three-quarter sleeves gathered into cuffs. A tie band crosses the front at the waist seam and ties at the back.
Silhouette: Close-fitting straight dress with a raised waist seam just under the bust.
Length: To the knee.
Neckline: High, wide round neckline finished with a folded bias binding topstitched along the fold.
Sleeves: Set-in three-quarter sleeves, gathered at the lower edge into a folded cuff.
Front: Upper front cut in one piece with pleats turned towards the side seams; lower front cut in one piece.
Pockets: Slanted pockets in the lower front, running from the waist seam to the side seams, with pocket bags and pocket sides.
Back: Centre back seam, a horizontal seam at waist level and darts on the back pieces.
Waist: A folded tie band sits on the front, its lower edge overlapping the waist seam by 1 cm; it is caught in the side seams and its ends tie in a bow at the back.
Finishing: Seams sewn with a stretch or narrow zigzag stitch or on a 3- or 4-thread overlocker; hem turned up 2 cm and topstitched with a twin needle.
Intermediate. Sewing knit fabric, front pleats, slanted pockets, a bias-bound neckline, gathered sleeves set into cuffs.
Medium-stretch knit fabric of natural or blended fibres.
If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: all seams – 0.7 cm. Hem allowance of the garment – 2 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (remember to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches – they must match!
Tip: Cut pieces from knit fabrics are sewn with a special elastic or narrow zigzag stitch. When serging, trim seam allowances to 0.8 cm. The hem allowance is topstitched with a twin needle to maintain elasticity. You can also sew pieces directly on a 3- or 4-thread overlock machine.

#4412
Knit Tunic Dress with Collar

#4414
Fitted Collared Dress with Flounces and Sleeves

#4411
Sleeveless Fit-and-Flare High-Low Hem Dress

#4410
Collared Dress with Cuffs, Back Zip and Decorative Flaps
#4416
Pleated Bodice Cap Sleeve Dress

#4409
Bow Front Cap Sleeve Sheath Dress

#4408
Contrast V-Neck Shift Dress with Split Cuffs

#4405
Fitted Guipure Collared Dress with Pleats

Minerva Support
Online