Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4354
#4356

Asymmetrical Pleated Tulip Pencil Skirt

Pattern #4355

A women's knee-length pencil skirt with a tulip-style front: a pleated outer front lapped over an inner front, both with a curved, faced lower edge. No waistband, a faced waist and a concealed zipper in the centre back seam. Drafted to your own measurements. Recommended fabric: pliable suiting fabrics of natural or blended fibres.

Tech. Description

Asymmetrical Pleated Tulip Pencil Skirt

A women's knee-length pencil skirt with a tulip-style front: a pleated outer front lapped over an inner front, both with a curved, faced lower edge. No waistband, a faced waist and a concealed zipper in the centre back seam.

When To Wear

  • For the office with a fitted blouse or a short jacket.
  • For daytime events and dinners in spring and autumn, with tights and court shoes.

Key Design Features

Silhouette: Pencil skirt, fitted through the hips and narrowing slightly towards the hem.

Length: To the knee.

Waist: No waistband. The top edge is finished with interfaced front and back facings, understitched 0.2 cm from the seam and sewn to the zipper tape.

Front: Three pieces: an outer front, an inner part and a side front. Pleats folded downwards fan out from one side of the waist on the outer front. The outer front and inner part each have a curved lower edge finished with an interfaced facing, sewn by hand with blind stitches. The two are basted together and joined to the side front by a princess seam.

Back: Two back pieces with a centre back seam and a dart on each side.

Closure: Concealed zipper in the centre back seam.

Finishing: Back hem turned up 3 cm and sewn by hand with blind stitches; seams overlocked.

Level Of Difficulty

Intermediate. Pleats laid to markings, curved edges finished with facings, a faced waist with understitching and a concealed zipper.

Fabric Recommendations

Pliable suiting fabrics of natural or blended fibres.

Additional Supplies

  • Fusible interfacing (all facings)
  • 1 concealed zipper

Cutter's Must

From main fabric:

  • Back Skirt – 2 pieces
  • Side Front – 1 piece
  • Inner Part – 1 piece
  • Outer Front – 1 piece
  • Back Facing – 2 pieces
  • Front Facing – 1 piece
  • Outer Front Facing – 1 piece
  • Inner Front Facing – 1 piece

From fusible interfacing:

  • Back Facing – 2 pieces
  • Front Facing – 1 piece
  • Outer Front Facing – 1 piece
  • Inner Front Facing – 1 piece

Sewing Instructions

  1. Fuse interfacing to the facings.
  2. Stitch the darts on the Back Skirt pieces and press them towards the center. Overlock the center back edges of each piece separately. Stitch the center back seam from the mark to the bottom edge. Press the seam allowances open, also pressing the zipper opening allowances. Insert the concealed zipper.
  3. Fold and secure the pleats on the Outer Front (pleat depths pressed downwards).
  4. Overlock the inner edges of the Outer Front Facing and the Inner Front Facing. Place each facing on its piece (Outer Front, Inner Part) right sides together and stitch the bottom edge. Clip seam allowances at curves, turn facings to the wrong side, straighten, and press. Hem the edges of the facings with blind stitches.
  5. Lay the Outer Front over the Inner Part, baste them together along the edges and treat them as one piece. Stitch the front princess seam to the Side Front, press the seam allowances towards the side and overlock.
  6. Overlock the bottom edge of the Back Skirt. Stitch the side seams, folding the back hem allowance around the seam. Press the allowances towards the back and overlock. Hem the Back Skirt with blind stitches.
  7. Stitch the side seams of the Back Facing and Front Facing and press them open. Overlock the bottom edge. Place the facing on the skirt right sides together and stitch the top edge. Topstitch seam allowances onto the facing 0.2 cm from the stitching line. Fold facings to the wrong side, press. Fold under the center edges and sew to the zipper tape. Attach the facing to the side seam allowances.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Additional options

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?