Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A knee-length women's fit-and-flare dress with a wide boat neckline, short set-in sleeves with a stitched tuck near the hem, gathers under the bust, a wide waist inset and a skirt shaped with inverted pleats front and back. Invisible zipper in the centre back seam. Drafted to your own measurements. Recommended fabric: dress fabrics in natural or blended fibres.
A knee-length women's fit-and-flare dress with a wide boat neckline, short set-in sleeves with a stitched tuck near the hem, gathers under the bust, a wide waist inset and a skirt shaped with inverted pleats front and back. Invisible zipper in the centre back seam.
Silhouette: Fitted bodice and waist, skirt flaring out from inverted pleats.
Length: About knee length.
Neckline: Wide, shallow boat neckline finished with interfaced front and back facings; the seam allowances are understitched to the facing.
Sleeves: Short set-in sleeves with a horizontal tuck stitched along the markings and pressed upwards, so the lower edge looks turned up. Cap eased into the armhole.
Front: One-piece upper front with gathers between marks above the inset seam, under the bust.
Waist: Wide straight inset at the waist, in one piece at the front and two pieces at the back.
Skirt: Lower front cut on the fold and lower back pieces, both with inverted pleats laid and basted before they are joined to the inset.
Back: Upper back in two pieces with darts pressed towards the centre, centre back seam with an invisible zipper.
Finishing: Dress hem turned up 1.5 cm and sleeve hems 1.2 cm, both topstitched.
Intermediate. Gathers and inverted pleats matched to a waist inset, sleeve tucks, an eased sleeve cap, an invisible zipper and a neckline facing finished to the zipper tape.
Dress fabrics in natural or blended fibres.
If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: all seams – 1 cm; dress hem allowance – 1.5 cm; sleeve hem allowance – 1.2 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (remember to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches – they must match!
From main fabric:
From fusible interfacing:

#4323
Fitted Paneled Color Block Collared Dress

#4325
Sheath Dress with Square Cutout Neckline and Cuffed Elbow Sleeves

#4322
Sleeveless Sheath Dress with Yoke and Collar

#4320
Fitted Dress with Overlapping Collar

#4317
Sleeveless Pleated Neck Sheath Dress with Gathered Waist

#4331
Knit Paneled Dress with Cuffed Sleeves

#4316
Shift Dress with Cap Sleeves and Bow Belt

#4315
Short Sleeve Tie Neck Dress

Minerva Support
Online