Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A women's fitted knee-length dress for knit fabric, with princess seams, a contrast centre front panel divided by a waist insert with belt loops, three-panel sleeves with a contrast centre panel, and a folded collar whose ends overlap at the front and are held with a brooch. Drafted to your own measurements. Recommended fabric: medium-stretch knit fabric of natural or blended fibres, plus a companion fabric for the centre front and the sleeve centre panels.
A women's fitted knee-length dress for knit fabric, with princess seams, a contrast centre front panel divided by a waist insert with belt loops, three-panel sleeves with a contrast centre panel, and a folded collar whose ends overlap at the front and are held with a brooch.
Silhouette: Close-fitting, shaped by princess seams on the front and back; knee length.
Collar: Folded collar, stitched along two sides and turned, set into the neckline so that its ends overlap by 2 cm at the front; a decorative brooch is pinned on it.
Front: Centre front cut in an upper and a lower part from the companion fabric, joined by a horizontal insert at the waist in the main fabric. Side fronts in the main fabric.
Waist: Two belt loops stitched into the seams of the waist insert. Recommended: wear with a belt.
Sleeves: Long set-in sleeves in three panels: front and back panels in the main fabric, centre panel in the companion fabric.
Back: Centre back seam and princess seams.
Finishing: Seams overlocked and pressed; hems of the dress and sleeves turned up and topstitched.
Intermediate. Matching princess seams and the waist insert in knit fabric, setting three-panel sleeves and attaching an overlapping collar.
Medium-stretch knit fabric of natural or blended fibres, plus a companion fabric for the centre front and the sleeve centre panels.
If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: allowance for the hem of the garment and sleeve hem – 2 cm, other seams – 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need. When stitching pieces, pay attention to the notches – they must match! Attention! The inscriptions on the patterns are made from the right side.
From main fabric:
From companion fabric:

#4322
Sleeveless Sheath Dress with Yoke and Collar

#4324
Boat Neck Pleated Fit-and-Flare Dress

#4325
Sheath Dress with Square Cutout Neckline and Cuffed Elbow Sleeves

#4320
Fitted Dress with Overlapping Collar

#4317
Sleeveless Pleated Neck Sheath Dress with Gathered Waist

#4316
Shift Dress with Cap Sleeves and Bow Belt

#4315
Short Sleeve Tie Neck Dress

#4331
Knit Paneled Dress with Cuffed Sleeves

Minerva Support
Online