Fitted Paneled Color Block Collared Dress

CUTTER'S MUST

• From main fabric:
1. BACK PANEL center part – QTY 2
2. BACK PANEL side part – QTY 2
3. FRONT PANEL side part — QTY 2
4. FRONT PANEL insert — QTY 1
5. COLLAR — QTY 2
6. SLEEVE back part – QTY 2
7. SLEEVE front part – QTY 2
8. TRIM STRIP — QTY 1
• From companion fabric:
1. FRONT PANEL central upper part — QTY 1
2. FRONT PANEL central lower part — QTY 1 on fold
3. SLEEVE central part – QTY 2

Sewing Instructions

1. Overlock one longitudinal edge of the TRIM STRIP. Press the unoverlocked edge inwards, covering it with the overlocked edge. Stitch a double seam, securing the longitudinal SEAM ALLOWANCES. Cut the TRIM STRIP into 2 parts.
2. Attach the insert to the upper and lower parts of the FRONT PANEL, inserting the TRIM STRIPS. Overlock the SEAM ALLOWANCES and press them downwards.
3. Stitch the princess seams of the FRONT PANEL and BACK PANEL. Overlock the SEAM ALLOWANCES and press them towards the center.
4. Stitch the side and shoulder seams. Overlock the SEAM ALLOWANCES and press them towards the BACK PANEL.
5. Stitch all SLEEVE edges. Overlock the SEAM ALLOWANCES and press them towards the BACK PANEL.
6. Set the SLEEVE into the armhole, aligning the seams. Overlock the SEAM ALLOWANCES.
7. Fold the COLLAR lengthwise, right sides together, and stitch two sides. Turn the COLLAR right side out and press. Attach the COLLAR to the neckline, aligning the NOTCHES. Attention! The COLLAR edges overlap by 2 cm.
8. Overlock the hem of the dress and SLEEVE, fold inwards, and topstitch.
9. Pin a decorative brooch to the COLLAR. The dress is recommended to be worn with a belt.