Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4276
#4278

Cowl Neck Draped Front A-Line Dress

Pattern #4277

A women's A-line knit dress to the knee with a cowl neckline, cut-on short sleeves and a diagonal pleated insert across the front. Made from four pattern pieces. Drafted to your own measurements. Recommended fabric: for knit fabric only: medium-stretch jersey of natural or blended fibres.

Tech. Description

Cowl Neck Draped Front A-Line Dress

A women's A-line knit dress to the knee with a cowl neckline, cut-on short sleeves and a diagonal pleated insert across the front. Made from four pattern pieces.

When To Wear

  • For work and everyday wear, with flat shoes or low heels.
  • In spring and summer on its own, in cooler months with a cardigan and tights.

Key Design Features

Silhouette: A-line, widening from the bust to the hem.

Length: About knee length.

Neckline: Cowl neckline draping in folds at the front; the neck edge is overlocked, turned in and topstitched.

Sleeves: Short sleeves cut in one with the bodice, hemmed and topstitched.

Front: Upper front and lower front joined by a diagonal insert running from the shoulder side down to the opposite side seam. Pleats on the insert are laid by the markings, pressed downwards and caught in the side seam.

Back: Two pieces with a centre back seam.

Closure: None; the dress pulls on.

Finishing: Hem and sleeve edges turned up and topstitched; a twin needle keeps the hems stretchy. Seams can be sewn with a stretch or narrow zigzag stitch, or on a 3- or 4-thread overlocker.

Level Of Difficulty

Beginner. Few pieces and no closure; the only detail needing care is laying the pleats on the insert. Experience with knit fabric helps.

Fabric Recommendations

For knit fabric only: medium-stretch jersey of natural or blended fibres.

Additional Supplies

  • None besides fabric and thread.

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: Hem allowance for the garment bottom, sleeve hem and neckline – 1.5 cm, other seams 0.8 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need. Note! Markings on the patterns are on the right side.

  • Back – 2 pieces
  • Upper Front – 1 piece
  • Lower Front – 1 piece
  • Front Inset – 1 piece

Tip: Cut pieces from knit fabrics are sewn with a special elastic or narrow zigzag stitch. The hem allowance is topstitched with a twin needle to maintain elasticity. You can also sew the pieces directly on a 3- or 4-thread overlock machine.

Sewing Instructions

When stitching pieces, pay attention to the notches - they must match!

  1. Stitch the centre back seam of the Back. Overlock the seam allowance and press it to the left side.
  2. Stitch the Front Inset to the Upper Front and the Lower Front. Overlock the seam allowances and press them downwards.
  3. On the Front Inset, lay the pleats according to the markings, with the pleat depths facing downwards. Secure the pleats along the side edge.
  4. Stitch the shoulder and side seams. Overlock the seam allowances and press them towards the back.
  5. Overlock the neckline edge. Fold the allowance to the inside and topstitch.
  6. Overlock the bottom edge of the garment and the sleeve hems. Fold to the wrong side, press, and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?