Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4225
#4227

Short Sleeve Gathered Neck Blouson Dress

Pattern #4226

An above-knee women's dress in knit fabric with a blouson bodice, a gathered neckline finished with a band and a drawstring waist casing. The fitted lower part has curved front pockets and the short sleeves are set in. Drafted to your own measurements. Recommended fabric: medium-stretch knit fabric in natural or blended fibres.

Tech. Description

Short Sleeve Gathered Neck Blouson Dress

An above-knee women's dress in knit fabric with a blouson bodice, a gathered neckline finished with a band and a drawstring waist casing. The fitted lower part has curved front pockets and the short sleeves are set in.

When To Wear

  • Everyday wear in spring and summer, with sneakers or sandals.
  • Over leggings or tights with a cardigan on cooler days.

Key Design Features

Silhouette: Blouson bodice gathered into a waist casing over a straight, close-fitting lower part.

Length: Above the knee.

Neckline: Round neckline gathered between marks and finished with a folded band, topstitched 0.5 cm from the seam.

Sleeves: Short set-in sleeves with a topstitched hem.

Front: Princess seams on the bodice front; the lower front is cut on the fold.

Pockets: Curved pockets on the lower front, the opening topstitched 2 cm from the edge.

Back: Centre back seam on both the upper and lower back.

Waist: A band set into the waist seam forms a casing for a decorative cord tied at the front; 2 cm elastic is threaded into the front neckline section.

Finishing: Hem turned up 2.5 cm and topstitched; seams 0.7 cm, overlocked.

Level Of Difficulty

Beginner. Knit seams, a gathered neckline with a band, a simple casing and pockets on the lower front.

Fabric Recommendations

Medium-stretch knit fabric in natural or blended fibres.

Additional Supplies

  • Decorative cord
  • Elastic, 2 cm wide (approximate length marked on the front pattern piece)

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: Hem and sleeve hem allowance – 2.5 cm, placket short side allowance – 2 cm, other seams – 0.7 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (do not forget to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches - they must match!

  • Upper Back – 2 pieces
  • Lower Back – 2 pieces
  • Center Front – 1 piece on fold
  • Lower Front – 1 piece on fold
  • Side Front – 2 pieces
  • Sleeve – 2 pieces
  • Pocket Side – 2 pieces
  • Pocket Bag – 2 pieces
  • Placket (waist casing) – 1 piece
  • Neckline band – 1 strip 6 cm wide, length equal to the neckline (cut by measurement)

Sewing Instructions

  1. Stitch the princess seams on the front (center front to side fronts). Overlock allowances and press towards the center.
  2. Place the pocket bag on the lower front and stitch the pocket opening. Turn the pocket bag to the wrong side and press. Topstitch along the pocket opening 2 cm from the edge. Stitch the pocket side to the pocket bag.
  3. Stitch the center seams on the upper back and lower back. Overlock allowances and press to the left side.
  4. Stitch the shoulder and side seams on the upper parts of the dress. Overlock allowances and press towards the back.
  5. Stitch with a loosely tensioned upper thread between the marks on the neckline and gather. Cut the neckline band 6 cm wide, with a length equal to the neckline length. Stitch the band into a loop. Fold in half lengthwise and press. Stitch the band to the neckline. Overlock the allowance. Topstitch along the neckline 0.5 cm from the seam.
  6. Stitch the side seams of the lower parts. Overlock allowances and press.
  7. Fold the allowances of the short sides of the placket inwards and press. Stitch the upper and lower parts of the dress together, inserting the placket by its lower edge. Overlock the allowance and press downwards. Fold the upper edge of the placket inwards and topstitch 0.1 cm from the top of the placket, forming a casing.
  8. Stitch the sleeve seam. Overlock the allowance. Set the sleeves into the armholes. Overlock the sleeve hem allowance, fold inwards and topstitch.
  9. Overlock the bottom edge of the garment, press to the wrong side and topstitch.
  10. Thread the elastic into the front neckline section and the decorative cord into the waist casing.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?