Fabric & Materials
FABRIC RECOMMENDATIONS: well-draping dress fabrics made from natural or blended fibers. ALSO NEEDED: fusible interfacing, invisible zipper. IF THE PATTERNS HAVE A DOUBLE CONTOUR, SEAM ALLOWANCES ARE INCLUDED. IF THE CONTOUR IS SINGLE, SEAM ALLOWANCES ARE NOT INCLUDED. SEAM ALLOWANCES: all seams 1 cm; hem allowance for the garment bottom – 2 cm; hem allowance for the sleeve bottom – 1.5 cm. ATTENTION! FIRST, PRINT OUT THE PAPER PATTERNS AND LAY THEM OUT ON THE FABRIC WIDTH (fabric width can be from 90cm to 150cm) TO DETERMINE HOW MUCH MATERIAL YOU WILL NEED (do not forget to account for paired and symmetrical pieces). WHEN STITCHING PIECES, PAY ATTENTION TO THE NOTCHES - THEY MUST MATCH!
CUTTER'S MUST
- From main fabric:
- Center back part - 2 pieces
- Upper side back part - 2 pieces
- Lower side back part – 2 pieces
- Upper side front part - 2 pieces
- Lower side front part – 2 pieces
- Center front part - 1 piece on fold
- Front neckline facing — 1 piece
- Back neckline facing – 2 pieces
- Sleeve — 2 pieces
- From fusible interfacing:
- Front neckline facing — 1 piece
- Back neckline facing – 2 pieces
Sewing Instructions
- Interface the facing pieces with fusible interfacing.
- Serge the center back edges separately. Stitch the center back seam from the zipper mark to the bottom, press seam allowances open, pressing the zipper opening. Insert the invisible zipper.
- Along the upper edge of the lower side back part, stitch with a loosened upper thread and gather. Stitch the upper and lower side back parts, press seam allowances upwards and serge. Stitch the back princess seams, press seam allowances towards the center and serge.
- Along the upper edge of the lower side front part, stitch with a loosened upper thread and gather. Stitch the upper and lower side front parts, press seam allowances upwards and serge. Stitch the front princess seams, press seam allowances towards the center and serge.
- Stitch the side and shoulder seams, press seam allowances towards the back and serge.
- Stitch the shoulder seams of the neckline facings, serge the outer edge. Place the facing on the garment right sides together and stitch the neckline edge. Clip seam allowances at curves, turn the facing to the wrong side, straighten and press. Attach the facing to the shoulder seams and the zipper tape.
- Serge the lower edge of the sleeve, press to the wrong side and topstitch. Stitch the sleeve seam, press seam allowances and serge. Set sleeves into armholes, matching notches, press seam allowances and serge.
- Serge the lower edge of the garment, press to the wrong side and topstitch.
