Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A women's long flared dress with a stand collar and a separating zip down the whole centre front. Sleeves are cut in front and back halves with a seam along the arm. A second fabric forms a band across the upper chest, back and sleeves, and a cord runs through a casing at the waist. Drafted to your own measurements. Recommended fabric: firm dress fabrics, in two colours or textures for the main and upper parts.
A women's long flared dress with a stand collar and a separating zip down the whole centre front. Sleeves are cut in front and back halves with a seam along the arm. A second fabric forms a band across the upper chest, back and sleeves, and a cord runs through a casing at the waist.
Silhouette: Bodice with sleeves joined below the shoulder point, a waist seam and a wide flared skirt.
Length: Mid-calf.
Collar: Interfaced stand, with outer and inner stand set into the neckline.
Sleeves: Front and back sleeve halves, each in two parts, joined to the bodice and topstitched 0.5 cm; the shoulder seam continues along the sleeve. Folded, interfaced cuffs.
Closure: Separating zip from the collar to the hem, stitched between the front and the facing.
Pockets: Hip pockets in the lower front, with a pocket side piece, secured at the side and waist seams.
Back: Centre back seam through bodice and skirt.
Waist: Separate casing topstitched over the waist seam with two rows from the right side; decorative cord threaded through.
Finishing: Upper front, upper back and upper sleeve parts cut from a second fabric (main fabric 1).
Intermediate. A full-length separating zip with facings and a stand collar, multi-part sleeves, hip pockets and an applied casing.
Firm dress fabrics, in two colours or textures for the main and upper parts.
If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: all seams 1 cm; hem allowance - 2 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90cm to 150cm) to determine how much material you will need (don't forget to account for paired and symmetrical pieces).
From main fabric:
From main fabric 1:
From fusible interfacing:
When stitching pieces, pay attention to the notches - they must match!

#2168
Woven Wrap Dress with Sleeves and Ties

#2170
Tailored Pencil Dress Contrast Lapels Cuffs

#2167
Collared Dress with Princess Seams

#2171
Square Neck Lace Trim Pleated Dress

#2166
Sleeveless Paneled Dress with Flap Pockets

#2172
Below the KNEE Belted Dress with Placket and Center Front Slit

#2173
Gathered Sweetheart Neck Cap Sleeve Dress

#2164
Scoop Neck Puff Sleeve Empire Waist Maxi Dress

Minerva Support
Online