Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A women's midi wrap dress with a V-neck, a bodice gathered at the shoulders and waist, a curved flounce along the wrap edge of the skirt and long gathered sleeves with buttoned cuffs. A separate belt ties at the side. Drafted to your own measurements. Recommended fabric: dress fabrics with good drape, made from natural or blended fibres.
A women's midi wrap dress with a V-neck, a bodice gathered at the shoulders and waist, a curved flounce along the wrap edge of the skirt and long gathered sleeves with buttoned cuffs. A separate belt ties at the side.
Silhouette: Fitted at the waist seam, with a flared wrap skirt.
Length: Midi, below the knee.
Neckline: V-neck formed by the crossover fronts; the upper fronts have a cut-on facing, the back neckline is bound with bias binding.
Front: Upper fronts gathered at the shoulder seam and at the waist seam. The wrap is held by an outer and an inner button with buttonholes on the fronts, and by a tie belt.
Sleeves: Long set-in sleeves, gathered at the cap and at the wrist; a slit finished with bias binding and a buttoned cuff.
Back: Upper back cut on the fold and gathered into a waist seam; lower back cut on the fold with a gathered flounce tier at the hem.
Skirt: Lower fronts with a flounce sewn along the curved wrap edge, running down to the hem.
Waist: Horizontal waist seam; belt cut as one piece, stitched and turned, opening closed by hand.
Finishing: 1.2 cm hem, overlocked, turned and topstitched.
Intermediate. Gathering in several seams, bias-bound neckline and sleeve slits, gathered sleeve caps, cuffs, a wrap closure with an inner button.
Dress fabrics with good drape, made from natural or blended fibres.
If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: all seams 1 cm; hem allowance for the dress bottom – 1.2 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90cm to 150cm) to determine how much material you will need (do not forget to account for paired and symmetrical pieces).
From main fabric:
From fusible interfacing:
When stitching pieces, pay attention to the notches - they must match!
#2157
Button-Front Dress with Flounce Hem
#2160
Flared Dress with Vertical Pintucks
#2155
Sleeveless Shirt Dress
#2161
Sheath Dress with a Turn-Down Collar
#2154
Fit and Flare Dress

#2162
Button-Front Shirtdress with Belt

#2152
Fitted Puff Sleeve Button Front Dress

#2164
Scoop Neck Puff Sleeve Empire Waist Maxi Dress

Minerva Support
Online