Minerva Digital Pattern 6076 – Tailcoat Waistcoat with Flat Collar
Introducing a digital pattern for the formal waistcoat designed for tailcoat ensembles – Refined Elegance with Traditional Detail.
WHEN TO WEAR DESIGN 6076
This waistcoat is the classic companion to a formal tailcoat, ideal for:
- White Tie Events: A traditional piece for evening dress codes requiring a tailcoat.
- Concert Performances & Ceremonies: The refined silhouette ensures elegance under formal jackets.
- Special Occasions: Weddings, galas, and receptions where sophistication is key.
KEY DESIGN FEATURES
Silhouette: Fitted waistcoat with a cropped front length, shaped to balance with the long tails of a formal coat.
Collar: Flat collar lying neatly along the deep V neckline, creating a sharp tailored frame.
Closure: Three-button fastening at the center front.
Pockets: Two welt finishes at the lower front (faux welts).
Back: Streamlined back with shaping darts for a clean fit under a jacket, and an adjustable waist tie with buckle.
Lining: Full internal lining to neatly finish the front edges, armholes, and hem without additional facings.
LEVEL OF DIFFICULTY
Intermediate. Precision is required when constructing welt finishes, setting the collar, and achieving a crisp tailored result.
SEAM ALLOWANCES
No seam allowances by default. If the option to add them at €1 is chosen, pattern will come with seam allowances included.
Please note: A single contour on the pattern pieces means no seam allowances are included. A double contour indicates seam allowances are included.
FABRIC RECOMMENDATIONS FOR DIGITAL PATTERN 6076
Choose structured, formal fabrics in natural or blended fibers for the body and lightweight lining for the interior finish:
- Wool suiting or worsted wool
- Wool blend or fine gabardine
- Satin or silk for lining
- Optional piqué cotton for traditional white tie versions
ADDITIONAL SUPPLIES
- Fusible interfacing – for collar, facings, and welt finishes
- Three buttons for front closure
- One metal buckle (approx. 2–2.5 cm) for the back waist tie
CUTTER’S MUST FOR DIGITAL PATTERN 6076
From Main Fabric:
- Front – 2 pieces
- Back – 2 pieces
- Collar – 2 pieces
- Front Facings – 2 pieces
- Pocket Welts – 2 pieces
- Back Tie – 2 pieces
From Lining Fabric:
- Front (minus facing) – 2 pieces
- Back – 2 pieces
- Collar – 2 pieces
From Interfacing:
- Collar – 2 pieces
- Front Facings – 2 pieces
- Pocket Welts – 2 pieces
IMPORTANT INFORMATION
Before cutting your fabric, print and lay out the paper patterns according to your fabric width (90–150 cm) to determine yardage. Remember to include paired and symmetrical pieces. Pay attention to pocket placement and balance lines when working with striped or patterned fabrics.
DIGITAL PATTERN 6076 FOR 3D DESIGNERS, CONTRACTORS, AND ADVANCED SEWISTS
DXF AAMA – For 3D designers, fully compatible with most 3D fashion software.
PLT – For contractors, enabling precise cutting layouts.
PDF – Print-at-home format for advanced sewists.
CUSTOM FIT OPTIONS WITH INDIVIDUAL MEASUREMENTS OR ASTM SIZES
Pattern 6076 offers both custom sizing based on individual measurements and ASTM US standard sizing:
- Bust/Chest: 35 cm to 170 cm
- Low Hip: 35 cm to 190 cm
The drafting software tailors the pattern to your specific dimensions, ensuring ideal fit at the shoulders, waist, and neckline—minimizing alterations and enhancing comfort.
