CUTTER'S MUST
- From velvet:
- BACK PANEL – 2 QTY
- FRONT PANEL – 1 QTY
- Strap – 2 QTY
- From LINING:
- Strap – 2 QTY
When cutting, pay attention to the direction of the pile. It should be directed upwards, strictly on all details. To avoid crushing the pile, SEAM ALLOWANCES are ironed either on a piece of the same velvet or on a thick terry towel from the wrong side.
Sewing Instructions
- Stitch the waist and bust darts on the BACK PANEL and FRONT PANEL pieces. Press the waist dart depths towards the center of the piece, and the bust darts upwards.
- Overlock the center back edge. Insert the ZIPPER from the upper edge to the NOTCHES. Fold back the lower part of the ZIPPER and stitch the center back edge from the NOTCHES downwards. Press the SEAM ALLOWANCES open.
- Stitch the side edges, press the SEAM ALLOWANCES towards the BACK PANEL and overlock.
- Turn the straps made of main fabric with LINING on three sides, leaving the lower edge open and inserting hooks and loops. Clip the SEAM ALLOWANCES at the curves, trim at the corners. Turn the strap to the right side.
- Overlock the armhole SEAM ALLOWANCES of the front and back, press to the wrong side and topstitch.
- Overlock the upper edge SEAM ALLOWANCES of the FRONT PANEL, press to the wrong side and topstitch, inserting the straps.
- Overlock the lower edge SEAM ALLOWANCES, press to the wrong side and topstitch.
