CUTTER'S MUST
- BACK PANEL – 1 QTY on fold
- Lower BACK PANEL – 1 QTY
- FRONT PANEL – 1 QTY on fold
- Lower FRONT PANEL – 1 QTY
- SLEEVE – 2 QTY
- CUFF – 2 QTY
- COLLAR – 1 QTY
Tip: When sewing knit fabrics, use a special elastic or narrow zigzag stitch. When serging, trim SEAM ALLOWANCES to 0.8 cm. Topstitch the hem allowance with a twin needle to maintain elasticity. Alternatively, you can sew the pieces directly on a 3- or 4-thread overlock machine.
Sewing Instructions
- Stitch the bust darts on the FRONT PANEL. Clip dart depths, serge, and press.
- Form pleats according to markings, stitch them from the neckline to the mark, press pleat depths towards the right side seam, and topstitch from the right side.
- Attach the SLEEVE to the BACK PANEL, press and serge SEAM ALLOWANCES. Attach the SLEEVE to the FRONT PANEL, press and serge SEAM ALLOWANCES. Stitch the SLEEVE seams and side seams in one continuous seam. Press and serge SEAM ALLOWANCES.
- Stitch the COLLAR into a loop. Press the COLLAR in half lengthwise with the right side out and attach it to the neckline of the BACK PANEL and FRONT PANEL. The COLLAR seam should be located to the left of the shoulder seam. Press and serge SEAM ALLOWANCES.
- Stitch the CUFF into a loop, press it in half lengthwise with the right side out, and attach it to the lower edge of the SLEEVE. Press and serge SEAM ALLOWANCES.
- Stitch the lower BACK PANEL and lower FRONT PANEL pieces together into a loop. Press the lower section in half lengthwise with the right side out and attach it to the lower edge. Press and serge SEAM ALLOWANCES.
