Paneled Asymmetrical Faux Wrap Skirt

Name: Paneled Asymmetrical Faux Wrap Skirt
Brand: Minerva Patterns
SKU: 5352
Price: 5.00 EUR
Availability: InStock

Pattern #5352

A women's knee-length denim skirt built from curved panels, with a wrap-look front whose diagonal edge is stitched into a front slit, a flared lower back gore and a facing-finished waist. Drafted to your own measurements. Recommended fabric: denim.

Tech. Description

Paneled Asymmetrical Faux Wrap Skirt

A women's knee-length denim skirt built from curved panels, with a wrap-look front whose diagonal edge is stitched into a front slit, a flared lower back gore and a facing-finished waist.

When To Wear

In spring and summer with a T-shirt, shirt or fitted knit top.
With a cardigan or jacket and tights in autumn.

Key Design Features

Silhouette: Fitted at the waist and hips, flaring towards the hem through the lower panels.

Length: About knee length.

Waist: No waistband; the top edge is finished with interfaced front and back facings, understitched 0.2 cm from the seam and hand-stitched to the zip.

Front: Asymmetric: the right side is built from a side panel, a small gore and a front gore, overlapping diagonally onto the left side with its lower front insert. The diagonal front edge is hemmed, and the front seam is stitched down to a notch, leaving an open slit below.

Back: Back panel with a curved seam to a lower slanted section, and a lower back gore set in for flare at the hem.

Closure: Zip in the side seam.

Finishing: All panel seams serged and pressed, with topstitching along the curved seams; hem and front edge turned and topstitched.

Level Of Difficulty

Intermediate. Joining curved seams and gores, a slanted lower back section, a side zip and a faced waist.

Fabric Recommendations

Denim.

Additional Supplies

Fusible interfacing (front and back facings)
Zip

Cutter's Must

From main fabric:

1. Back Skirt – 1 piece
2. Front Smaller Gore – 1 piece
3. Front Right Side Piece – 1 piece
4. Front Gore – 1 piece
5. Front Left Side Piece – 1 piece
6. Lower Front Insert – 1 piece
7. Lower Slanted Skirt – 1 piece
8. Lower Back Gore – 1 piece
9. Front Facing – 1 piece
10. Back Facing – 1 piece
From fusible interfacing: Front Facing, Back Facing.

Sewing Instructions

Fuse interfacing to the Front Facing and the Back Facing.
Stitch the Front Smaller Gore to the Front Right Side Piece. Overlock the seam and press it.
Stitch the Front Gore to the Front Smaller Gore. Overlock the seam and press it.
Stitch the Lower Front Insert to the Front Left Side Piece. Overlock the seam and press it.
Stitch the Lower Slanted Skirt to the Back Skirt. Overlock the seam and press it.
Stitch the Lower Back Gore to the Lower Slanted Skirt. Overlock the seam and press it.
Overlock the side edges of the skirt. Stitch the side seams, stopping at the zip notch on the zip side. Press the seams open and press back the zip opening allowances. Insert the zip.
Overlock the lower edge of the skirt and the asymmetric front edge. Stitch the front seam up to the notch and press it open.
Stitch the side seam joining the Back Facing and the Front Facing and press it open. Overlock the outer edge of the facings.
Place the facings on the upper edge of the skirt, right sides together, and stitch. Press the seam allowances onto the facings and understitch 0.2 cm from the seam. Turn the facings to the wrong side and press the upper edge of the skirt. Turn under the ends of the Front Facing and the Back Facing at the zip and hand-stitch them to the zip tape.
Press up and topstitch the hem allowance of the skirt and the asymmetric front edge.