Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5249
#5251

Panelled Cup Wide Strap Bra

Pattern #5250

A women's bra in woven fabric with two-part cups, a small centre front insert, wide doubled straps and a back band gathered on elastic and closed with a hook-and-eye fastening. Drafted to your own measurements. Recommended fabric: firm silk-type fabrics of natural or synthetic fibres, such as satin.

Tech. Description

Panelled Cup Wide Strap Bra

A women's bra in woven fabric with two-part cups, a small centre front insert, wide doubled straps and a back band gathered on elastic and closed with a hook-and-eye fastening.

When To Wear

  • As everyday lingerie, sewn as a set with matching briefs or a slip.
  • Under tops and dresses with a wide neckline where the straps can show.

Key Design Features

Front: Each cup is made of a side panel and a front panel joined by a seam. The cups are self-lined: the front panel is folded to the wrong side and stitched along the upper, front and lower edges. A centre insert, stitched along its upper and lower edges and turned, joins the cups. The cups are topstitched 0.5 cm from the lower edge.

Straps: Wide, cut double, stitched along the long sides and one short side, turned and edge-stitched. They are caught into the cup edge at the front and sewn to the side band at the back after fitting.

Back: Side bands cut on the fold and stitched into a tube, with elastic threaded through to a marking so the band gathers near the fastening.

Closure: Ready-made hook-and-eye fastening at the centre back.

Level Of Difficulty

Intermediate. Small, precise seams on curved cup panels, self-lined cups with the straps caught into the edge, elastic threaded into the band, a hook-and-eye fastening.

Fabric Recommendations

Firm silk-type fabrics of natural or synthetic fibres, such as satin.

Additional Supplies

  • Elastic tape
  • Ready-made hook-and-eye fastening

Cutter's Must

From main fabric:

  • 1. Strap – 4 pieces
  • 2. Side Bra – 2 pieces on fold
  • 3. Side Cup – 4 pieces
  • 4. Front Cup – 2 pieces on fold
  • 5. Front Inset – 2 pieces on fold

Sewing Instructions

  1. Place the Straps in pairs, right sides together, and stitch along the long edges and one short end. Turn the Straps right side out, press, and edge-stitch.
  2. Stitch the Side Cup pieces to the Front Cups. Fold each Front Cup along its fold line to the wrong side and stitch along the upper, front and lower edges, catching a Strap between the layers. Turn the cups right side out, baste, and press.
  3. Fold each Side Bra in half lengthwise and stitch along the long edge, then turn right side out and press. Stitch the Side Bra pieces to the cups.
  4. Place the two Front Inset pieces right sides together and stitch the upper and lower edges. Turn the Front Inset right side out and press. Stitch the Front Inset to the cups. Topstitch the cups along the lower edge 0.5 cm from the edge.
  5. Thread elastic through the open ends of the Side Bra pieces up to the marks, secure it, and gather the fabric onto it. Stitch the parts of the hook-and-eye fastening to the ends of the Side Bra pieces.
  6. Try on the bra, adjust the length of the Straps, and sew them to the Side Bra pieces.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?