Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5229
#5231

Halter-Tie Bra Top

Pattern #5230

A women's halter bra top with shaped cups, each made of a front and a side section under a faced upper band. The straps tie in a bow behind the neck, and the centre back is a gathered panel with elastic casings. Drafted to your own measurements. Recommended fabric: silk fabrics from natural or man-made fibres, such as silk satin.

Tech. Description

Halter-Tie Bra Top

A women's halter bra top with shaped cups, each made of a front and a side section under a faced upper band. The straps tie in a bow behind the neck, and the centre back is a gathered panel with elastic casings.

When To Wear

  • In summer with high-waisted briefs, shorts or a skirt.
  • As a matching top for a silk lingerie or loungewear set.

Key Design Features

Silhouette: Close-fitting band top that ends just below the bust.

Neckline: Halter: two self-fabric straps sewn to the front at the marks and tied at the back of the neck.

Front: Each cup has a front and a side section joined by a vertical seam topstitched close to the edge. A faced upper band runs along the top of each cup. The cups are set into a centre front band cut on the fold.

Back: Interfaced side back panels and a centre back insert: a tube of fabric stitched into casings, with elastic threaded through and the fabric gathered on it. No fastening; the top pulls on over the head.

Finishing: Upper and lower edges of the front and back turned to the wrong side and topstitched; side seams and cup seams topstitched close to the edge; straps edge-stitched.

Level Of Difficulty

Intermediate. Interfacing, small curved cup seams, a faced cup band, edge-stitching and a gathered elastic insert.

Fabric Recommendations

Silk fabrics from natural or man-made fibres, such as silk satin.

Additional Supplies

  • Woven fusible interfacing (side back, front band, all cup sections)
  • Elastic for the back insert

Cutter's Must

From main fabric:

  • 1. Strap – 2 pieces on fold
  • 2. Middle Back – 1 piece on fold
  • 3. Side Back – 2 pieces
  • 4. Front – 1 piece on fold
  • 5. Side Cup – 2 pieces
  • 6. Front Cup – 2 pieces
  • 7. Upper Cup – 4 pieces

From fusible interfacing:

  • 3. Side Back – 2 pieces
  • 4. Front – 1 piece on fold
  • 5. Side Cup – 2 pieces
  • 6. Front Cup – 2 pieces
  • 7. Upper Cup – 2 pieces

Sewing Instructions

  1. Fuse interfacing to the Side Back, Front, Side Cup, Front Cup and two of the Upper Cup pieces.
  2. Stitch each Side Cup to a Front Cup. Edge-stitch the Front Cups along the seams. Stitch the interfaced Upper Cup pieces to the top of the cups.
  3. Stitch the side seams. Edge-stitch the Side Back pieces along the seams. Fold the seam allowances of the upper and lower edges of the Front and back to the wrong side and topstitch.
  4. Stitch the cups to the Front and edge-stitch along the seams. Place the remaining Upper Cup pieces on the attached ones, right sides together, and stitch along the upper edge. Turn them to the wrong side, fold under the lower raw edge and sew it to the seam allowances. Topstitch along the upper edge and along the cup seam.
  5. Fold the Middle Back in half lengthwise, right sides together, and stitch the long edge. Turn it right side out and press so that the seam lies in the middle of the piece. Stitch rows of topstitching to form casings, thread elastic through them and gather the fabric onto the elastic. Secure the elastic and stitch the Middle Back to the Side Back pieces. Topstitch the Side Back pieces along the seams.
  6. Fold each Strap in half lengthwise, right sides together, and stitch along the long edge and one short end. Turn the Straps right side out, press and edge-stitch. Sew the Straps to the Front at the marks.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?