Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5227
#5229

Button-Front Silk Bustier Bralette

Pattern #5228

A women's cropped bustier with two-piece seamed cups, a centre front button placket with six buttons and front panels shirred with elastic thread. The straps are self-fabric, and the upper edge is trimmed with a ready-made frill. Drafted to your own measurements. Recommended fabric: silk fabrics from natural or man-made fibres; batiste.

Tech. Description

Button-Front Silk Bustier Bralette

A women's cropped bustier with two-piece seamed cups, a centre front button placket with six buttons and front panels shirred with elastic thread. The straps are self-fabric, and the upper edge is trimmed with a ready-made frill.

When To Wear

  • As a summer top with high-waisted skirts or trousers.
  • As lingerie or sleepwear.
  • Under an open shirt or jacket.

Key Design Features

Silhouette: Close-fitting, ending above the waist.

Length: Cropped, covering the ribcage.

Neckline: Sweetheart-shaped upper edge formed by the cups, finished with a narrow double-turned hem and ready-made trim.

Front: Each half has a shirred middle panel and a plain side panel; the middle panels are cut 5 cm larger, gathered on rows of elastic thread zigzagged on 1 cm apart, then recut to the pattern. Cups in two parts (front and side) with topstitched seams.

Closure: Two folded plackets at the centre front, topstitched close to the edge; buttonholes on the right, six buttons on the left.

Back: Back in two pieces with a straight upper edge, trimmed like the front.

Finishing: Narrow straps folded and turned, topstitched close to the edge, length adjusted at fitting; hem double-turned and topstitched.

Level Of Difficulty

Intermediate. Shirring with elastic thread, two-piece cups set into the front, button plackets and fitting the strap length on lightweight silk.

Fabric Recommendations

Silk fabrics from natural or man-made fibres; batiste.

Additional Supplies

  • Elastic thread
  • Elastic tape
  • Ready-made trim
  • 6 buttons

Cutter's Must

  • Strap – 2 pieces
  • Placket – 2 pieces on fold
  • Back – 2 pieces
  • Side Front – 2 pieces
  • Middle Front – 2 pieces (first cut 5 cm larger on all edges for shirring, see step 1)
  • Side Cup – 2 pieces
  • Front Cup – 2 pieces

Sewing Instructions

  1. Shirr the fabric for the Middle Front pieces. To do this, cut the Middle Front pieces 5 cm larger on all edges. On the wrong side of the fabric, zigzag over elastic threads in rows 1 cm apart, without piercing the threads with the needle. Draw up the fabric on the elastic threads and secure the thread ends. Place the Middle Front pattern on the shirred piece and recut it with seam allowances.
  2. Stitch the Side Front pieces to the Middle Front pieces. Topstitch the seam.
  3. Stitch the Side Cup to the Front Cup. Topstitch the seam. Stitch the cups to the front. Press the seam allowance of the top edge of the cups to the wrong side, turn it under and topstitch.
  4. Press the hem allowance to the wrong side, turn it under and topstitch.
  5. Stitch the Plackets to the front pieces. Fold the Plackets in half lengthwise, right sides together, and stitch across the top and bottom short ends. Turn the Plackets right side out, turn under the open edge and topstitch it into the joining seam. Edgestitch the Plackets. Make buttonholes on the right Placket and sew the buttons on the left.
  6. Fold the Straps in half lengthwise, right sides together, and stitch along the long edges. Turn the Straps right side out, press and edgestitch. Try on the bralette, adjust the length of the Straps and sew them to the top edge of the bodice.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?