Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5206
#5208

Cut-In Armhole Dress with Diagonal Double-Layer Front

Pattern #5207

A women's below-the-knee sheath dress in knit fabric with American armholes, a high neck finished with a folded band, and a double-layer upper front cut on the diagonal. A loose overlay panel with a cut-on facing lies over the lower front. Drafted to your own measurements. Recommended fabric: knit fabrics and stretch materials only.

Tech. Description

Cut-In Armhole Dress with Diagonal Double-Layer Front

A women's below-the-knee sheath dress in knit fabric with American armholes, a high neck finished with a folded band, and a double-layer upper front cut on the diagonal. A loose overlay panel with a cut-on facing lies over the lower front.

When To Wear

  • Evening events, dinners and receptions.
  • Spring and summer: the shoulders are left bare.

Key Design Features

Silhouette: Close-fitting, shaped with darts on the front and back.

Length: Below the knee.

Neckline: High round neck finished with a strip folded in half lengthwise, forming a narrow stand.

Sleeves: Sleeveless, with American armholes cut in from the base of the neck. Armhole allowances are stabilised with fusible tape, pressed under and hand-sewn with blind stitches.

Front: Upper front in two layers (outer and inner), sewn together along the armholes and the diagonal lower edge, then joined to the lower front. Under it, a loose overlay panel with a cut-on facing is attached along its upper edge and hangs over the lower front to the hem.

Back: Two back pieces with a centre back seam and a slit at the hem.

Closure: Zipper in the upper part of the centre back seam.

Finishing: Hem, slit allowances and the inner edge of the overlay facing finished with blind stitches.

Level Of Difficulty

Intermediate. A double-layer upper front joined over a layered lower front, a zipper in knit fabric, a folded neck band and hand-finished armholes.

Fabric Recommendations

Knit fabrics and stretch materials only.

Additional Supplies

  • Fusible stay tape (armholes, upper edge of the overlay panel, lower edge of the inner upper front)
  • 1 zipper

Cutter's Must

From main fabric:

  • Upper Front – 2 pieces
  • Lower Front – 1 piece
  • Detachable Piece Front (loose overlay panel) – 1 piece
  • Back – 2 pieces
  • Stand Collar (neckline band) – 1 piece
  • Fusible stay tape: press a strip of fusible tape onto the seam allowances of the armhole edges (on the front, only on the inner Upper Front; do not apply it over the dart areas), along the upper edge of the Detachable Piece Front and along the lower edge of the inner Upper Front.

Sewing Instructions

  1. Stitch the darts. On the Upper Front pieces, press the darts upwards; on the other pieces, press them towards the centre.
  2. Press the cut-on facing of the Detachable Piece Front to the wrong side and baste it at the top. Place the Detachable Piece Front right side down on the wrong side of the Lower Front and stitch the top edges together between the darts. Clip the seam allowances near the darts, perpendicular to the seam. Turn the overlay panel to the right side so that its wrong side lies on the right side of the Lower Front. Baste the top and side edges.
  3. Place the two Upper Front pieces right sides together and stitch the armhole edges and the lower edges between the cross marks. Trim the seam allowances and clip them near the marks, perpendicular to the seam. Turn the Upper Front right side out and press.
  4. Stitch the lower edge of the outer Upper Front to the top edges of the Lower Front and the overlay panel, starting from the cross marks. Press the seam allowances upwards, turn under the lower edge of the inner Upper Front and topstitch it into the seam.
  5. Stitch the centre back seam of the Back between the marks. Press the seam allowances of the slit to the wrong side and hem them with blind stitches.
  6. Press the seam allowances along the armhole edges to the wrong side and sew them by hand with blind stitches. Stitch the side seams. Tack the seam allowances near the armholes.
  7. Fold the Stand Collar in half lengthwise, wrong sides together, and press. Place it on the neckline, matching the marks, and stitch.
  8. Press the seam allowances of the zipper opening to the wrong side. Place the zipper under the edges and stitch, turning under the upper ends of the tape.
  9. Press the hem allowance to the wrong side and hem with blind stitches. Also hem the inner edge of the cut-on facing of the overlay panel.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?