Fitted Halter Top Cowl Neck

CUTTER'S MUST

• From main fabric:
• 1 FRONT PANEL - 1 piece on fold
• 2 BACK PANEL - 2 pieces
• 3 back strap - 1 piece on fold
• 4.back neckline FACING - 1 piece on fold
• FUSIBLE INTERFACING: back strap, back neckline FACING.

Sewing Instructions

1. Reinforce the back strap and back neckline FACING with FUSIBLE INTERFACING.
2. Stitch the center back seam and darts on the BACK PANEL. Press dart depths towards the center back.
3. Turn the integrated FRONT PANEL upper FACING to the right side and topstitch along the armhole edges.
4. Stitch the strap along the longitudinal edge, folding it right sides together, turn out and press, gently stretching along the fold.
5. Turn the integrated FRONT PANEL upper FACING and armhole SEAM ALLOWANCES to the wrong side. Insert the strap ends into the upper corners between the SEAM ALLOWANCES. Topstitch the top along the armholes from the right side at the edge and at a distance of 0.7 cm from it.
6. Attach the neckline FACING to the BACK PANEL along the upper edge, right sides together. Topstitch the SEAM ALLOWANCES onto the FACING.
7. Stitch the side seams, without catching the FACING. Sew the FACING to the SEAM ALLOWANCES of the center, side seams, and dart depths.
8. Turn up the hem allowance and topstitch at the edge and at a distance of 0.7 cm from it.