CUTTER'S MUST
- From main fabric:
- 1. FRONT PANEL - 1 QTY on fold
- 2. BACK PANEL - 1 QTY on fold
- 3. SLEEVE - 2 QTY
- 4. Neckline casing TRIM STRIP - 1 QTY on fold
- 5. Neckline casing tie - 4 QTY
- 6. SLEEVE FLOUNCE - 2 QTY
- 7. Front slit FACING - 1 QTY
Sewing Instructions
- Place the slit FACING on the FRONT PANEL, right sides together, pin along the drawn slit line, and stitch along the three sides of the marking, close to it.
- Cut the FACING and FRONT PANEL between the stitches.
- Turn the FACING to the wrong side, press the slit edges.
- Fold the FACING to a width of 0.75 cm and baste.
- Topstitch the FRONT PANEL along the slit edges.
- Sew the side seams and SLEEVE seams.
- Stitch the short edges of each SLEEVE FLOUNCE.
- Serge the lower edges of the SLEEVE FLOUNCES with a dense, narrow zigzag stitch. Press the SEAM ALLOWANCE to the wrong side. From the right side of the FLOUNCE, stitch a dense, fine zigzag stitch along the fold. From the wrong side of the FLOUNCE, carefully trim the excess SEAM ALLOWANCE close to the stitching.
- Gather each SLEEVE FLOUNCE along the upper edge to match the length of the SLEEVE's lower edge.
- Attach the FLOUNCES to the lower edges of the SLEEVES.
- Set the SLEEVES into the open armholes. Serge the SLEEVE insertion SEAM ALLOWANCES together and press them towards the SLEEVE in the lower part of the armhole.
- Serge the neckline edge with a dense, narrow zigzag stitch. Press the SEAM ALLOWANCE to the wrong side. From the right side, stitch a dense, fine zigzag stitch along the fold. From the wrong side of the neckline, carefully trim the excess SEAM ALLOWANCE close to the stitching.
- On the neckline casing TRIM STRIP, press the SEAM ALLOWANCES along the longitudinal and short edges to the wrong side.
- Pin the TRIM STRIP to the blouse on the wrong side according to the marking, aligning the ends of the TRIM STRIP with the edges of the front slit.
- Topstitch the TRIM STRIP along the marking.
- Neatly turn out the ties to a width of 0.5 cm and thread them through the neckline casing.
- Turn under the hem SEAM ALLOWANCE and topstitch at a distance of 1.5 cm.
