Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
Introducing a women's sewing pattern for a relaxed tunic featuring an elegant crossover shawl collar secured with buttons, and a gently flared silhouette.
This tunic is designed for versatile wear, offering a blend of comfort and style perfect for:
Silhouette: A relaxed A-line silhouette, gently flaring from the bust to the hem for a flattering drape.
Neckline & Collar: Features an elegant shawl collar that gracefully crosses over at the front neckline.
Closure: The crossover front is secured with two prominent buttons, positioned just below the bust.
Sleeves: Classic long, straight set-in sleeves provide a smooth and comfortable finish.
Back: Designed with a clean center back seam for subtle shaping and a tailored appearance.
Hem: A gently curved hemline, subtly dipping at the sides, enhances the tunic's modern aesthetic.
Length: Tunic length, falling to the low hip for comfortable coverage and styling versatility.
Intermediate. Requires careful handling of stretch fabrics, precise collar construction, and knit-specific finishing techniques.
Choose knit fabrics with medium stretch that offer good drape and recovery:
FABRIC RECOMMENDATIONS: medium stretch knit fabric made of natural or blended fibers. ALSO NEEDED: knit fusible interfacing; 2 buttons.
IF THE PATTERNS HAVE A DOUBLE CONTOUR, THEY INCLUDE SEAM ALLOWANCES. IF THE CONTOUR IS SINGLE, THE PATTERNS DO NOT INCLUDE SEAM ALLOWANCES. SEAM ALLOWANCES: hem allowance for the garment bottom, sleeve hem – 1.5 cm, other seams 0.8 cm. ATTENTION! FIRST, PRINT OUT THE PAPER PATTERNS AND LAY THEM OUT ON THE FABRIC WIDTH (fabric width can be from 90 cm to 150 cm) TO DETERMINE HOW MUCH MATERIAL YOU WILL NEED. WHEN STITCHING PIECES, PAY ATTENTION TO THE NOTCHES - THEY MUST MATCH!
Tip: Knit fabric pieces are stitched with a special elastic or narrow zigzag stitch. The hem allowance is topstitched with a twin needle or on a coverstitch machine to maintain elasticity. You can also stitch pieces directly on a 3- or 4-thread overlocker.

Minerva Support
Online