Pattern

Fabric & Materials

FABRIC RECOMMENDATIONS: thin dress fabrics made from natural or blended fibers. ALSO NEEDED: invisible zipper; fusible interfacing.

CUTTER'S MUST

IF THE PATTERNS HAVE A DOUBLE CONTOUR, THEY INCLUDE SEAM ALLOWANCES. IF THE CONTOUR IS SINGLE, THE PATTERNS DO NOT INCLUDE SEAM ALLOWANCES. SEAM ALLOWANCES: all seams 1 cm. Hem allowance for the dress bottom edge – 3.0 cm, hem allowance for the sleeve bottom edge – 2 cm. ATTENTION! FIRST, PRINT OUT THE PAPER PATTERNS AND LAY THEM OUT ON THE FABRIC WIDTH (fabric width can be from 90cm to 150cm) TO DETERMINE HOW MUCH MATERIAL YOU WILL NEED (do not forget to account for paired and symmetrical pieces). WHEN STITCHING PIECES, PAY ATTENTION TO THE NOTCHES - THEY MUST MATCH!

• From main fabric:
  • Back – 2 pieces
  • Upper front part - 1 piece
  • Lower front part – 1 piece
  • Back neckline facing - 2 pieces
  • Front neckline facing - 1 piece
  • Sleeve – 2 pieces
• From fusible interfacing:
  • Back neckline facing - 2 pieces
  • Front neckline facing - 1 piece

Sewing Instructions

1. Fuse interfacing to the facing pieces.
2. Stitch darts on the back pieces. Press dart allowances towards the center. Overlock the center back edge separately on each piece. Stitch the center back edge from the mark to the bottom. Press open the center back seam allowances. Insert the zipper.
3. Fold and secure pleats on the upper and lower front pieces. Stitch the front pieces together. Overlock the allowance and press it upwards.
4. Stitch side and shoulder seams, press allowances towards the back and overlock.
5. Stitch shoulder seams of the neckline facings, press allowances open. Overlock the outer edge. Place the facing on the garment right sides together and stitch the neckline edge. Turn the facing to the wrong side, straighten, press. Secure the facing to the main garment at the shoulder seams and center back edge.
6. Stitch the sleeve seam. Overlock the allowance and press. Set the sleeve into the armhole, matching notches. Overlock the allowance and press.
7. Overlock the bottom edge of the dress and sleeve, press to the wrong side and topstitch.