Zippered Padded Two-Tone Jacket with Stand Collar

Name: Zippered Padded Two-Tone Jacket with Stand Collar
Brand: Minerva Patterns
SKU: 4601
Price: 5.00 EUR
Availability: InStock

Pattern #4601

A women's mid-thigh-length padded jacket in two fabrics, with a stand collar, a front zip and pockets set into the horizontal seam between the upper and lower parts. Quilted lines across the upper front and back; fully lined. Drafted to your own measurements. Recommended fabric: jacket fabrics of natural or blended fibres, with a companion fabric for the lower part.

Tech. Description

Zippered Padded Two-Tone Jacket with Stand Collar

When To Wear

In autumn and spring, and on mild winter days: the whole jacket is padded with synthetic batting.
Over jumpers and shirts with trousers or jeans for everyday wear.

Key Design Features

Silhouette: Straight, slightly widening towards the hem; the upper and lower parts are cut from different fabrics.

Length: Mid-thigh length.

Collar: High stand collar, cut double, padded on the outer layer.

Closure: Full-length zip, inserted between the front edge and the front facing.

Sleeves: Set-in, straight, with a line of topstitching near the hem.

Pockets: In-seam pockets in the seam joining the upper and lower fronts, with interfaced openings.

Back: Upper and lower back, each cut on the fold, joined by a horizontal seam; three quilting lines across the upper back.

Finishing: Each piece is backed with synthetic padding and handled as one layer; quilting lines on the upper front and back hold the top fabric to the padding.

Lining: Full lining, cut as upper and lower back and front plus sleeves, attached to the facings, the hem and the sleeve hems.

Level Of Difficulty

Intermediate. Padded and quilted layers, in-seam pockets, a zip set between the front and the facing, a double stand collar and a bagged lining.

Fabric Recommendations

Jacket fabrics of natural or blended fibres, with a companion fabric for the lower part.

Additional Supplies

Companion fabric
Lining fabric
Synthetic padding (batting)
Zip for the full front length
Fusible interfacing (pocket openings)

Cutter's Must

If the patterns have a double contour, the patterns include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: Hem allowance for jacket bottom and sleeve bottom — 3 cm, all other seams 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (do not forget to account for paired and symmetrical details). When stitching pieces, pay attention to the notches - they must match!

From main fabric:

Upper back – 1 piece with fold
Upper front – 2 pieces
Sleeve — 2 pieces
Collar stand – 2 pieces
Back neckline facing – 1 piece
Front facing – 2 pieces

From main fabric 2:

Lower back – 1 piece with fold
Lower front – 2 pieces
Pocket bag — 4 pieces

From synthetic padding:

Upper back – 1 piece with fold
Upper front – 2 pieces
Sleeve — 2 pieces
Collar stand – 1 piece
Lower back – 1 piece with fold
Lower front – 2 pieces

From lining fabric:

Upper back – 1 piece with fold
Lower back – 1 piece with fold
Upper front – 2 pieces
Lower front – 2 pieces
Sleeve — 2 pieces

Sewing Instructions

Interface the pocket opening allowance with fusible interlining.
Place synthetic padding pieces on the wrong side of the main fabric pieces and secure along the contour. Then treat as one piece. Stitch decorative lines along the marked lines on the front and back, securing the top to the synthetic padding. Stitch a decorative-securing stitch along the bottom of the sleeve.
Stitch pocket bags to the upper and lower front parts. Start and end the stitch strictly at the pocket opening marks. Stitch the upper and lower front parts, simultaneously facing the pocket bags. Press allowances open through a press cloth.
Stitch the upper and lower back parts. Press allowances open.
Stitch and press open the shoulder seams of the jacket.
Attach the outer collar stand to the neckline. Clip and press allowances open.
Stitch the shoulder seams of the front facings and neckline facing. Press allowances open. Attach the inner collar stand to the neckline. Clip and press allowances open.
Place the front facing on the right side of the front piece, right side down, and stitch along the front edge, inserting the zipper, simultaneously facing the collar. Start and end the stitch strictly at the marked bottom line.
Set the sleeves into the jacket. Stitch the side seam simultaneously with the sleeve seam.
On the lining fabric pieces, stitch the seams, leaving an opening in the left side seam. Set the sleeves.
Secure the neckline and collar stand attachment allowances. Stitch the lining to the front facings and neckline facing. Stitch the bottom edge of the lining to the bottom edge. Stitch the lining to the bottom of the sleeve. Turn right side out.