Sleeved Dress With Pockets And Back Zipper

CUTTER'S MUST

• From main fabric:
1. BACK PANEL - 2 QTY
2. FRONT PANEL - 1 QTY on fold
3. SLEEVE - 2 QTY
4. Pocket - 2 QTY
5. BACK PANEL FACING - 4 QTY
6. FRONT PANEL FACING - 2 QTY
• From FUSIBLE INTERFACING:
1. BACK PANEL FACING - 2 QTY
2. FRONT PANEL FACING - 1 QTY

Sewing Instructions

1. Fuse FUSIBLE INTERFACING to the FACING pieces.
2. Overlock the center edges of the BACK PANEL. Stitch the center edge from the NOTCH for the ZIPPER to the bottom. Press SEAM ALLOWANCES open.
3. Stitch the darts on the FRONT PANEL. Press dart depths upwards.
4. Overlock the pocket along the contour. Fold SEAM ALLOWANCES inwards and press. Fold the top SEAM ALLOWANCE of the pocket to the wrong side and topstitch. Topstitch the pocket onto the FRONT PANEL according to markings.
5. Stitch the side and shoulder edges, press SEAM ALLOWANCES towards the BACK PANEL and overlock.
6. Stitch the shoulder edges of the inner and outer FACINGS. Press SEAM ALLOWANCES open. Place FACINGS right sides together and stitch along the neckline. Attach FACINGS to the FRONT PANEL and BACK PANEL. Overlock the SEAM ALLOWANCE and press towards the FACING. Topstitch along the FACING 0.2 cm from the seam.
7. Insert the ZIPPER.
8. Stitch the SLEEVE edge. Overlock the SEAM ALLOWANCE and press towards the BACK PANEL. Set the SLEEVES into the armholes, aligning the NOTCHES. Overlock the SEAM ALLOWANCE.
9. Overlock the hem allowance of the dress and SLEEVE, press to the wrong side and topstitch.