Tunic Dress with Curved Side Panels
A versatile tunic dress sewing pattern featuring a comfortable, relaxed fit, subtly curved side panels with integrated pockets, and elegant cap sleeves.
When To Wear
This elegant yet comfortable tunic dress is perfect for various occasions, offering both style and ease:
-
Office Chic: Worn with skinny pants or leggings, this tunic can be a professional and comfortable choice for a modern work wardrobe.
-
Casual Sophistication: Ideal for daily wear, brunches, or relaxed social gatherings with skinny bottoms or without.
-
Travel Essential: Its comfortable knit fabric and relaxed silhouette make it perfect for travel and sightseeing worn with leggings.
Key Design Features
Silhouette: a comfortable, relaxed shift silhouette falling above the knee.
Neckline: a simple, classic round crew neck, finished with bias binding for a clean look.
Closure: Pullover style with no visible fastenings for effortless wear.
Sleeves: Short, elegant integrated sleeves providing subtle shoulder coverage.
Pockets: Discretely integrated in-seam pockets within the curved side panels.
Back: Features a clean center back seam for subtle shaping.
Length: Designed to sit at mid=thigh, offering a modern and stylish length.
Level Of Difficulty
Intermediate. This pattern requires experience with knit fabrics, bias binding application, and in-seam pocket construction.
Fabric Recommendations
Choose soft knit fabrics with medium stretch for the best drape and comfort:
- Medium-weight jersey knits
- Ponte de Roma
- Interlock knit
- Viscose jersey
Additional Supplies
No additional notions are required.
Cutter's Must
- From main fabric:
- 1. Back - 2 pieces
- 2. Side - 2 pieces
- 3. Center front – 1 piece on fold
- 4. Pocket lining - 2 pieces
Sewing Instructions
- Clip the front seam allowance near the pocket opening. Place the pocket lining onto the front and stitch along the pocket opening. Turn the lining to the wrong side and press. Align and secure the lining to the front along the side and bottom edges. Then, treat as one piece.
- Stitch the center back seam of the back. Overlock the seam allowance and press open.
- Stitch the left shoulder seam. Overlock the seam allowance and press towards the back. Cut a bias binding 4 cm wide and a length equal to the neckline length + 6 cm. Fold the bias binding in half lengthwise, right side out, and press. Place the trim strip along the neckline edge on the right side, extending the ends, and stitch. Fold the trim strip to the wrong side, clip the seams, and topstitch along the fold to the main piece. Press the seam. Stitch the left shoulder seam. Press the seam allowance towards the back, overlock.
- Cut a bias binding 4 cm wide and a length equal to the armhole length of the side + 6 cm. Fold the bias binding in half lengthwise, right side out, and press. Place the trim strip along the armhole edge on the right side, extending the ends, and stitch. Fold the trim strip to the wrong side, clip the seams, and topstitch along the fold to the main piece.
- Clip the dart on the back 2 cm between the lines. Overlock, fold inwards, and topstitch the lower edge of the sleeve. Stitch the contoured seam of the back: fold the back sleeve to the right side, aligning the dart sides; align the contoured edges and stitch, gradually tapering the stitching to nothing after the cross mark, press and overlock the seam allowances. Similarly, finish the contoured seam of the front, attaching the pocket lining to the side at the bottom.
- Overlock the bottom edge of the tunic, press to the wrong side, and topstitch.
