Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4323
#4325

Boat Neck Pleated Fit-and-Flare Dress

Pattern #4324

A knee-length women's fit-and-flare dress with a wide boat neckline, short set-in sleeves with a stitched tuck near the hem, gathers under the bust, a wide waist inset and a skirt shaped with inverted pleats front and back. Invisible zipper in the centre back seam. Drafted to your own measurements. Recommended fabric: dress fabrics in natural or blended fibres.

Tech. Description

Pleated Fit-and-Flare Dress

A knee-length women's fit-and-flare dress with a wide boat neckline, short set-in sleeves with a stitched tuck near the hem, gathers under the bust, a wide waist inset and a skirt shaped with inverted pleats front and back. Invisible zipper in the centre back seam.

When To Wear

  • In spring and summer for daytime events, lunches and parties.
  • At the office with a cardigan or a short fitted jacket.

Key Design Features

Silhouette: Fitted bodice and waist, skirt flaring out from inverted pleats.

Length: About knee length.

Neckline: Wide, shallow boat neckline finished with interfaced front and back facings; the seam allowances are understitched to the facing.

Sleeves: Short set-in sleeves with a horizontal tuck stitched along the markings and pressed upwards, so the lower edge looks turned up. Cap eased into the armhole.

Front: One-piece upper front with gathers between marks above the inset seam, under the bust.

Waist: Wide straight inset at the waist, in one piece at the front and two pieces at the back.

Skirt: Lower front cut on the fold and lower back pieces, both with inverted pleats laid and basted before they are joined to the inset.

Back: Upper back in two pieces with darts pressed towards the centre, centre back seam with an invisible zipper.

Finishing: Dress hem turned up 1.5 cm and sleeve hems 1.2 cm, both topstitched.

Level Of Difficulty

Intermediate. Gathers and inverted pleats matched to a waist inset, sleeve tucks, an eased sleeve cap, an invisible zipper and a neckline facing finished to the zipper tape.

Fabric Recommendations

Dress fabrics in natural or blended fibres.

Additional Supplies

  • Invisible zipper
  • Fusible interfacing (front and back neckline facings)

Cutter's Must

From main fabric:

  • Upper Back – 2 pieces
  • Back Inset – 2 pieces
  • Lower Back – 2 pieces
  • Upper Front – 1 piece
  • Front Inset – 1 piece
  • Lower Front – 1 piece on fold
  • Sleeve – 2 pieces
  • Back Neckline Facing – 2 pieces
  • Front Neckline Facing – 1 piece

From fusible interfacing:

  • Back Neckline Facing – 2 pieces
  • Front Neckline Facing – 1 piece

Sewing Instructions

  1. Fuse interfacing to the Back Neckline Facings and Front Neckline Facing.
  2. Stitch the darts on the Upper Back pieces. Press the darts towards the center seam. Stitch the Back Insets to the Upper Back pieces, press the seam allowances towards the insets and serge.
  3. On the Lower Back pieces, lay and baste the inverted pleats. Stitch the Lower Back pieces to the Back Insets, press seam allowances upwards and serge.
  4. Serge the center back seam allowance separately on each piece. Stitch the center back seam from the notch to the bottom. Press seam allowances open, pressing the slit for the zipper. Insert the zipper.
  5. On the Upper Front, run loose-tension stitches between the marks and gather. Stitch the Front Inset to the Upper Front, press the seam allowances towards the inset and serge. On the Lower Front, lay and baste the inverted pleats according to the markings. Stitch the Lower Front to the Front Inset, press seam allowances upwards and serge.
  6. Stitch side and shoulder seams, press seam allowances towards the back and serge.
  7. Stitch shoulder seams of the facings. Press seam allowances open and serge. Serge the outer edge of the facings. Place the dress and facing right sides together, aligning the neckline edges. Stopping 5 mm short of the zipper edges, fold the facing back and pin it to the upper edge of the dress. Fold the center back seam allowances along the zipper towards the right side of the dress and pin them to the neckline edge over the facing. Stitch the neckline edge. Clip the seam allowances at the curves, turn right side out and press. Topstitch the seam allowances to the facing. Secure the facing to the zipper tape.
  8. On each Sleeve, stitch the horizontal tuck according to the markings and press it upwards. Stitch the underarm sleeve seam, press seam allowances and serge. Set in sleeves into armholes, matching notches and easing the cap. Press seam allowances and serge.
  9. Serge the hem allowance of the dress and sleeves, press to the wrong side and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?