Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A women's straight skirt with an asymmetrical front: the right front panel overlaps the left along a diagonal line that ends in a slit at the hem. A shaped yoke replaces the waistband and fastens with buttons that continue down a topstitched fly. Drafted to your own measurements. Recommended fabric: thin suiting fabrics with good drape, from natural or blended fibres.
A women's straight skirt with an asymmetrical front: the right front panel overlaps the left along a diagonal line that ends in a slit at the hem. A shaped yoke replaces the waistband and fastens with buttons that continue down a topstitched fly.
Silhouette: Straight, close-fitting skirt.
Waist: No waistband. Interfaced front and back yokes with an inner yoke; the front yoke ends in a tab on the right front. The yoke is topstitched 0.8 cm from the edge all round.
Front: Two front panels with pleats at the waist folded towards the side seams. The right panel lies over the left along a diagonal line; the fly extension is topstitched first through the right panel only, then along the diagonal through both panels.
Closure: 6 buttons: on the yoke tab and down the fly of the right front panel, plus one buttonhole and button on the inner yoke.
Back: One piece without a centre back seam, with darts below the back yoke.
Finishing: Interfaced hem facings at the front and back, topstitched 5 cm from the lower edge; the overlap opens into a slit at the hem.
Intermediate. An asymmetrical overlap with a cut-on facing and fly, clipping at the slit mark, a faced yoke with a tab, hem facings joined to the slit, and buttonholes.
Thin suiting fabrics with good drape, from natural or blended fibres.
If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: all seams – 1 cm. Allowance along the center edge of the Left Front Skirt and along the slit of the Right Front Panel – 4.5 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need. When stitching pieces, pay attention to the notches – they must match! The inscriptions on the patterns are made on the right side!
From main fabric:
From fusible interfacing:

Minerva Support
Online