Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4238
#4240

V-Neck Blouse with Flounce Sleeves & Peplum

Pattern #4239

A fitted women's blouse with a V-neckline, princess seams at front and back, set-in sleeves ending below the elbow in a flounce, and a flared peplum joined at the waist. Invisible zipper at the centre back. Drafted to your own measurements. Recommended fabric: blouse fabrics in natural or blended fibres.

Tech. Description

V-Neck Blouse with Flounce Sleeves & Peplum

A fitted women's blouse with a V-neckline, princess seams at front and back, set-in sleeves ending below the elbow in a flounce, and a flared peplum joined at the waist. Invisible zipper at the centre back.

When To Wear

  • With a pencil skirt or narrow trousers to the office.
  • To evening events and parties with a fitted skirt.

Key Design Features

Silhouette: Close-fitting through the bodice, flaring out into a peplum below the waist.

Length: Peplum ends at the hip.

Neckline: V-neck finished with interfaced front and back facings, hand-tacked at the shoulder seams.

Sleeves: One-piece set-in sleeves ending below the elbow, with a flared flounce sewn to the sleeve hem.

Front: Centre front cut in one piece on the fold, with princess seams to the side fronts.

Back: Princess seams and a centre back seam.

Closure: Invisible zipper in the centre back seam, running through the peplum.

Waist: Peplum in a one-piece front and two-piece back, joined to the bodice at the waist seam.

Finishing: Peplum hem and flounce hems turned up, overlocked and topstitched.

Level Of Difficulty

Intermediate. Princess seams, a peplum and an invisible zipper crossing the waist seam, sleeve flounces and a V-neck with facings.

Fabric Recommendations

Blouse fabrics in natural or blended fibres.

Additional Supplies

  • 1 invisible zipper
  • Fusible interfacing (neckline facings)

Cutter's Must

If the patterns have a double contour, seam allowances are included. If the contour is single, the patterns do not include seam allowances. Seam allowances: All seams – 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90cm to 150cm) to determine how much material you will need. Attention! Markings on the patterns are made on the right side.

From main fabric:

  • Center Front – 1 piece on fold
  • Center Back – 2 pieces
  • Sleeve – 2 pieces
  • Side Front – 2 pieces
  • Side Back – 2 pieces
  • Front Peplum – 1 piece
  • Back Peplum – 2 pieces
  • Flounce – 2 pieces
  • Back Neckline Facing – 2 pieces
  • Front Neckline Facing – 1 piece

Sewing Instructions

  1. Fuse interfacing to the Front Neckline Facing and the Back Neckline Facings. Stitch the shoulder seams of the facings. Overlock the outer edge of the facings.
  2. Stitch the princess seams on the front and back (Center Front to Side Front, Center Back to Side Back). Overlock the seams and press them towards the centre front and centre back respectively.
  3. Overlock the centre back edges of the Center Back pieces.
  4. Stitch the shoulder and side seams. Press the seams towards the back and overlock.
  5. Place the facings on the right side of the blouse and stitch around the neckline. Clip the seam allowances on the curves. Turn the facings to the wrong side and press. Tack the facings by hand at the shoulder seams.
  6. Stitch the side seams of the Front Peplum and Back Peplum. Overlock the seam allowances and press them towards the back. Overlock the centre back edges of the Back Peplum. Stitch the peplum to the lower edge of the blouse. Overlock the seam allowances and press them downwards. Stitch the centre back seam of the peplum from the mark downwards. Insert the invisible zipper into the centre back seam. Press the peplum hem allowance to the wrong side, overlock and topstitch.
  7. Stitch the sleeve seam. Overlock the seam allowance and press it towards the back. Set the sleeve into the armhole, matching the notches. Stitch the Flounce seam. Overlock the seam allowance and press it towards the back. Press the flounce hem allowance to the wrong side, overlock and topstitch. Stitch the flounce to the sleeve, matching the marks. Overlock the seam allowance and press it towards the flounce.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?