Cropped Gathered 3/4 Sleeve Bolero
Introducing a sophisticated women's bolero pattern featuring a cropped silhouette, elegant front gathers integrated into a yoke, and three-quarter length sleeves, designed to be fully lined for a polished finish.
When To Wear
This bolero is designed for stylish layering, making it a perfect choice for:
- Formal Events & Dinners: Ideal as a chic cover-up over elegant dresses or sophisticated tops.
- Evening & Cocktail Attire: Adds a refined touch and a layer of warmth to your ensemble for special occasions.
- Bridal & Ceremonial Wear: Offers a graceful and modest complement to sleeveless gowns or dresses.
Key Design Features
Silhouette: Cropped, open-front bolero designed to sit above the natural waist.
Neckline & Front: Features an elegant open front with a subtle stand collar band, leading into a shaped yoke with delicate gathers at the shoulders/bust line.
Closure: Designed with an open front for effortless layering, without any closures.
Sleeves: Three-quarter length, two-piece set-in sleeves for a tailored and comfortable fit.
Back: Clean back design with vertical darts for subtle shaping.
Lining: Fully lined construction ensures a luxurious feel and a neat interior finish.
Level Of Difficulty
Intermediate. Requires confident sewing skills including working with gathers, setting two-piece sleeves with ease, constructing a collar stand, and assembling a fully lined garment with tailoring notions.
Fabric Recommendations
Choose medium-weight fabrics with good drape and a smooth finish, such as:
- Silk suiting fabrics (natural or blended fibers)
Additional Supplies
- Lining fabric
- Fusible interfacing
- Shoulder pads
- Sleeve heads
Cutter's Must
If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: all seams 1 cm. Hem allowance for sleeve hem 3.5 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (do not forget to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches - they must match!
- From main fabric:
- Back – 1 piece
- Front – 2 pieces
- Yoke - 2 pieces
- Upper sleeve – 2 pieces
- Lower sleeve – 2 pieces
- Back hem facing – 1 piece
- Front facing – 2 pieces
- Back neckline facing – 1 piece
- From lining fabric:
- Back – 1 piece
- Front – 2 pieces
- Yoke - 2 pieces
- Upper sleeve – 2 pieces
- Lower sleeve – 2 pieces
- From fusible interfacing: front facing, back hem facing, back neckline facing, yoke, sleeve hem.
Attention: Front and back lining pieces are cut according to the main fabric patterns, subtracting the width of the front facings and back neckline facing, respectively. When cutting the front lining, lay pleats on the main fabric pattern.
Sewing Instructions
- Interface pieces with fusible interfacing.
- On the back, stitch and press darts towards the center.
- On the front, stitch pleats according to markings. Distribute pleats to both sides, forming a box pleat. Attach yoke to front. Overlock seam and press towards yoke.
- Stitch and press open shoulder and side seams of the jacket.
- Stitch and press open collar seam. Clip seam allowance at the corner of the yoke. Attach collar to neckline. Press seam allowances open.
- Stitch and press open shoulder seams of the back neckline facing and front facing. Attach back hem facing to front facing. Press seams open. Clip seam allowance at the corner of the front facing. Attach collar to the neckline of the back facing. Press seam allowances open.
- Place front facing on the right side of the front, right side down, pin and stitch along the front edge, collar, and hem. Topstitch the seam allowance of the front edge to the front facing. The stitching should be 0.2 cm from the seam. Turn front edges to the right side, straighten seams.
- Stitch and press open the elbow seam of the sleeve. Press up the sleeve hem. Stitch and press open the front seam of the sleeve.
- Set sleeves into armholes according to notches, easing the sleeve cap. Insert shoulder pads and sleeve heads.
- On the lining pieces, stitch seams and set sleeves, leaving an opening in the front right sleeve seam.
- Attach lining to the inner edges of the front facings and facings. Secure collar attachment seam allowances close to the seams.
- Attach lining to the sleeve hem. Turn the bolero right side out through the opening in the sleeve. Stitch the opening in the sleeve closed.
