Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4107
#4109

Collarless Jacket with Cuffed Sleeves

Pattern #4108

A women's short, collarless lined jacket with a horizontal seam above the hem joining a double-layer lower band, darts on the front and back, a single button with a hanging bias loop, and long sleeves with deep folded cuffs. Drafted to your own measurements. Recommended fabric: suiting fabrics of natural or blended fibres.

Tech. Description

Collarless Jacket with Cuffed Sleeves

A women's short, collarless lined jacket with a horizontal seam above the hem joining a double-layer lower band, darts on the front and back, a single button with a hanging bias loop, and long sleeves with deep folded cuffs.

When To Wear

  • Over blouses and dresses at the office.
  • With trousers or a straight skirt in spring and autumn.

Key Design Features

Silhouette: Fitted, shaped by front and back darts.

Length: Short, ending at the high hip.

Neckline: Round, collarless; the front edges curve away from each other at the neck and at the hem.

Closure: One button with a bias-cut hanging loop on the right front, at the level of the lower band seam; the fronts meet edge to edge.

Front: Upper front with a dart, joined to a lower band cut double and faced together with the lining.

Sleeves: One-piece set-in sleeves with deep cuffs folded lengthwise and interfaced.

Back: Centre back seam through the upper back and lower band; back darts.

Lining: Full lining of body and sleeves, sewn to front facings and a back neck facing; the sleeve lining is attached to the inner edge of the cuff, and the jacket is turned through an opening in the sleeve lining.

Level Of Difficulty

Intermediate. Bagged lining with facings, a double lower band, sewn-on cuffs finished with the lining and a hand-made bias loop.

Fabric Recommendations

Suiting fabrics of natural or blended fibres.

Additional Supplies

  • Lining fabric
  • Fusible interfacing (front facings, back neck facing, cuffs)
  • 1 button

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: all seams 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (do not forget to account for paired and symmetrical pieces).

From main fabric:

  • Upper Front – 2 pieces
  • Lower Front – 4 pieces
  • Upper Back – 2 pieces
  • Lower Back – 4 pieces
  • Sleeve – 2 pieces
  • Cuff – 2 pieces
  • Center Front Facing – 2 pieces
  • Back Neckline Facing – 1 piece

From lining fabric:

  • Front Lining – 2 pieces
  • Back Lining – 2 pieces
  • Sleeve Lining – 2 pieces
  • From fusible interfacing: Center Front Facing, Back Neckline Facing, Cuff.

Sewing Instructions

When stitching pieces, pay attention to the notches - they must match!

  1. Fuse interfacing to the Center Front Facings, the Back Neckline Facing and the Cuffs.
  2. Stitch the darts on the Upper Front and Upper Back. Press the darts towards the centre. Stitch the centre back seam. Press the allowances open.
  3. Stitch the side and shoulder seams. Press the allowances towards the back. Stitch the centre back seam and side seams of the outer Lower Front and Lower Back pieces. Stitch this lower band to the Upper Front and Upper Back. Press the allowances open.
  4. Stitch the sleeve seam. Press the allowances open. Fold the Cuff in half lengthwise and stitch the short ends. Stitch the Cuff to the sleeve, matching the notch to the cuff seam. Set the sleeve into the armhole.
  5. Cut a bias strip 3 cm wide and as long as the button diameter plus 2 cm. Fold the strip in half lengthwise and stitch 0.3 cm from the fold. Trim the allowances and turn right side out. Attach the loop to the right front at the level of the lower band seam.
  6. Stitch the darts in the lining pieces. Stitch the side and shoulder seams of the lining. Set in the Sleeve Linings, leaving an opening in the seam of the right sleeve lining.
  7. Stitch the Center Front Facings to the Back Neckline Facing at the shoulders and press the seams open. Stitch the facings to the jacket lining. Press the allowances towards the lining. Stitch the centre back seam and side seams of the inner Lower Front and Lower Back pieces. Stitch this inner band to the lining. Place the facing on the jacket front, right sides together, and stitch along the front edge, the neckline and the lower edge, with the jacket front uppermost. Stitch the lower edge of the Sleeve Lining to the inner edge of the Cuff. Turn the jacket right side out through the opening in the sleeve lining. Stitch the opening closed. Stitch in the ditch of the cuff attaching seam to hold the layers together.
  8. Sew on the button.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?