Blouse with Tie Collar

Name: Blouse with Tie Collar
Brand: Minerva Patterns
SKU: 4075
Price: 5.00 EUR
Availability: InStock

Pattern #4075

This Minerva sewing pattern creates a fitted blouse with an integrated tie collar that gracefully drapes at the front, offering a flattering and feminine line. With short cap sleeves and a pullover style, it is designed for professional settings, smart-casual gatherings, or to add sophistication to everyday wear. This intermediate pattern can be made to your own measurements or in standard sizes.

Tech. Description

Fitted Blouse with Tie Collar

Introducing a women's sewing pattern for a fitted blouse featuring a unique integrated tie collar that gracefully drapes at the front.

When To Wear

This versatile blouse is designed for a range of occasions, offering effortless elegance:

Professional Settings: Its refined silhouette and tie collar make it suitable for office wear or formal meetings.
Smart Casual Gatherings: Easily dressed up or down for lunches, dinners, or social events.
Elevated Everyday Wear: Adds a touch of sophistication to a polished daily ensemble.

Key Design Features

Silhouette: Shaped and fitted through the torso, offering a flattering and feminine line.

Neckline & Collar: Features a stylish stand collar that extends into a long, integrated tie. The tie is threaded through an opening on the front bodice, allowing for versatile styling.

Sleeves: Short, cap sleeves offering a comfortable and elegant shoulder line.

Closure: Pullover style with no visible fastenings, relying on the tie for front styling.

Back: a smooth and clean back bodice, complementing the front design.

Hem: Straight hem designed for a clean finish.

Level Of Difficulty

Intermediate. Requires accurate dart construction, precise collar and tie assembly, and careful finishing of the neckline and armholes.

Fabric Recommendations

Achieve the intended drape and elegant finish with well-draping blouse fabrics:

Natural or blended fiber blouse fabrics
Crepe-satin

Additional Supplies

No additional notions are required.

Cutter's Must

If the patterns have a double contour, seam allowances are included. If the contour is single, the patterns do not include seam allowances. Seam allowances: Hem allowance – 2.5 cm, armhole seam allowance – 1.2 cm, other seams – 1.0 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (do not forget to account for paired and symmetrical pieces).

From main fabric:
- Back - 1 piece on fold
- Front - 1 piece on fold
- Collar – 1 piece

Sewing Instructions

When stitching pieces, pay attention to the notches - they must match!

Fold the collar piece in half lengthwise, right sides together, and stitch the section from the edge to mark “o” and the tie section between the “arrow” marks. Clip allowances at marks, turn the collar right side out, and press.
Stitch bust darts on the front, press depths upwards.
Stitch shoulder seams, press allowances towards the back and serge.
Clip the neckline allowance on the right side of the front at the bottom point and at the mark. Serge this small section, press to the wrong side, and topstitch. Attach the short edge of the collar to the left side of the front between the mark and the bottom point of the neckline, forming a pleat on the collar. Stitch the outer of the collar into the garment's neckline from the mark on the right side of the front to the bottom point of the neckline. Press allowances towards the collar. Press the lower edge of the inner of the collar to the wrong side and topstitch into the collar attachment seam. Thread the tie through the created opening.
Serge armhole edges, press to the wrong side, and topstitch. Stitch side seams, press allowances towards the back and serge. Place a bar tack at the armhole.
Press the garment hem to the wrong side by 1 cm, then by 1.5 cm, and topstitch.

See all customer makes →