Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A women's off-the-shoulder blouse with long, full sleeves. The upper edge and the sleeve ends are shirred with elastic thread, so the blouse pulls on with no fastening. Drafted to your own measurements. Recommended fabric: blouse fabrics of natural or blended fibres.
A women's off-the-shoulder blouse with long, full sleeves. The upper edge and the sleeve ends are shirred with elastic thread, so the blouse pulls on with no fastening.
Silhouette: Loose, waist-length body.
Neckline: Off-the-shoulder: the upper edge of the body and sleeves is turned under (3 cm) and stitched with rows of elastic thread, leaving a small frill on top.
Sleeves: Long and full, sewn to the body along the armhole; the 4 cm sleeve hem is turned and shirred with elastic thread, leaving a frill at the wrist.
Front: Front and back are cut from the same piece and joined at the side seams, sewn in one go with the sleeve seams.
Waist: The drawing shows rows of shirring at the lower body above a short frill.
Finishing: Seams overlocked; 2 cm hem turned and topstitched.
Beginner. Two pattern pieces, straight seams and shirring with elastic thread.
Blouse fabrics of natural or blended fibres.
If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: Hem allowance 2 cm, top edge of back-front and sleeve – 3 cm, sleeve hem – 4 cm, other seams 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (don't forget to account for paired and symmetrical pieces).
When stitching pieces, pay attention to the notches - they must match!
Minerva Support
Online
