Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A women's cropped, fitted jacket with princess seams front and back, wide lapels with a notched collar, a three-button front and a separate band at the hem. Fully lined, with cuffs on the long sleeves. Drafted to your own measurements. Recommended fabric: soft wool or wool-blend fabrics, such as soft gabardine.
A women's cropped, fitted jacket with princess seams front and back, wide lapels with a notched collar, a three-button front and a separate band at the hem. Fully lined, with cuffs on the long sleeves.
Silhouette: Close-fitting, shaped by princess seams on the front and back; the seams are pressed towards the centre and topstitched 0.9 cm from the seam.
Length: Cropped, ending at the waist with a band sewn to the lower edge.
Collar: Two-piece notched collar (upper and under collar) with wide lapels; the lapel roll line is stayed with a 1 cm strip of interfacing.
Sleeves: Long set-in sleeves with eased caps and shoulder pads, finished with folded cuffs.
Front: Single-breasted, three buttons with buttonholes on the right front; front facings cut separately.
Back: Centre back seam and princess seams; back neck facing.
Waist: The hem band is cut in front and back sections, sewn in pairs and attached to both the jacket and the lining.
Finishing: Front edges, collar and lower edge topstitched 1 cm from the edge.
Lining: Full lining with lining sleeves; the jacket is turned through an opening in the right sleeve lining seam.
Intermediate. Notched collar set between jacket and facings, lapel stay tape, eased set-in sleeves with shoulder pads, a bagged full lining.
Soft wool or wool-blend fabrics, such as soft gabardine.
If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: All seams 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (do not forget to account for paired and symmetrical pieces).
From main fabric:
From lining fabric:
From fusible interfacing:
When stitching pieces, pay attention to the notches - they must match!

#4010
Blazer with Gathered Sleeve

#4011
Asymmetrical Zip Jacket

#4082
Collarless Blazer with Asymmetrical Draped Bow
#4084
Tailored One Button Blazer

#4108
Collarless Jacket with Cuffed Sleeves

#4113
Jacket with Draped Collar & Asymmetric Closure

#4114
Open Front Jacket with Bell Sleeves
#4122
Fitted Knit Jacket with Gathered Trim

Minerva Support
Online