V-Neck Wrap Blouse with Shoulder Gathering
A chic V-neck wrap blouse pattern, featuring elegantly gathered shoulders, a flattering fitted waist, and voluminous sleeves with gathered cuffs.
When To Wear
This V-neck wrap blouse is a versatile piece, perfect for:
- Professional Settings: Its elegant wrap silhouette and refined details make it suitable for office wear or business meetings.
- Evening & Smart Casual Gatherings: The luxurious fabric drape and stylish design elevate it for dinners, parties, or upscale social events.
- Everyday Elegance: Pair with tailored trousers or skirts for a sophisticated yet comfortable daytime look.
Key Design Features
Silhouette: A fitted waistline with a relaxed, draped upper body and voluminous sleeves.
Neckline: Elegant V-neck created by the overlapping wrap front.
Closure: Wrap front fastened with one visible button and a bias rouleau loop at the waist seam, plus an inner button and buttonhole on the left facing that hold the underlap.
Sleeves: Long, full set-in sleeves with a wrist opening, gathered into buttoned cuffs for a puffed effect.
Details: Gathering at the front shoulder seams adds soft volume to the wrap bodice.
Back: Upper back with a center back seam and darts, joined to a lower back band at the waist.
Hem: A smooth lower band below the waist seam, finished with a straight hem at the high hip.
Level Of Difficulty
Intermediate. Requires skills in working with gathers, wrap construction, and precise finishing of necklines and cuffs.
Fabric Recommendations
Select fabrics with good drape to best showcase the blouse’s design details:
- Blouse fabrics made from natural or blended fibers
Additional Supplies
- Fusible interfacing
- 3 buttons
- 1 internal button
Cutter's Must
If the patterns have a double contour, the patterns include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: hem allowance – 2.0 cm; other seams 1 cm. Attention! First of all, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need. When stitching pieces, pay attention to the notches - they must match!
- From main fabric:
- Upper Back – 2 pieces
- Lower Back – 1 piece (on fold)
- Upper Front – 2 pieces
- Lower Front – 2 pieces
- Sleeve – 2 pieces
- Cuff – 2 pieces
- Back Neckline Facing – 1 piece
- Center Front Facing – 2 pieces
- From fusible interfacing:
- Center Front Facing – 2 pieces
- Back Neckline Facing – 1 piece
- Cuff – 2 pieces
Sewing Instructions
- Fuse interfacing to the designated pieces.
- Stitch the darts on the Upper Back pieces, trim the dart folds, press towards the center, and overlock. Stitch the center back seam. Press seam allowances to the left side and overlock.
- Join the Upper Back to the Lower Back. Press seam allowance upwards and overlock.
- Join the Upper Fronts to the Lower Fronts. Overlock seam allowance and press upwards. Along the shoulder edge of the Upper Front, stitch with loosened upper thread and gather.
- Stitch shoulder and side seams, press seam allowances open and overlock.
- Cut a bias strip 2.5 cm wide and 10 cm long for the loop. Fold the strip lengthwise in half, right sides together, and stitch 0.3 cm from the fold. Trim seam allowances close to the stitching, turn the strip right side out, and straighten the rouleau. Adjust the loop length.
- Stitch the shoulder seams of the Back Neckline Facing and Center Front Facings and press open. Overlock the outer edge. Place the joined facings on the right side of the garment, right side down, pin, and stitch the front edge, neckline, and lower corner of the front edge, inserting the loop. Trim seams at corners. Understitch the front edge seam allowance onto the facing, 0.2 cm from the seam. Turn the front edges right side out, straighten the seams. Press the hem of the garment.
- Overlock sleeve edges separately. Stitch the sleeve seam from the armhole to the slit mark, press seam allowances open. Topstitch the slit 0.1 cm from the fold. Along the lower edge of the sleeve, stitch with loosened upper thread and gather. Set sleeves into armholes, press seam allowances and overlock.
- Fold cuff pieces lengthwise in half, right sides together, and stitch the side edges. Start and end stitching precisely at the marked seam line for attaching the cuff. Turn the piece right side out, press. Attach the outer side of the cuff to the sleeve, turn under the seam allowance of the inner side of the cuff and stitch it in the ditch of the cuff seam.
- Overlock the lower edge of the garment, press to the wrong side, and topstitch.
- Make buttonholes on the cuffs and sew on the buttons. Sew the button on the front to match the loop.
- Make the inner buttonhole on the left Center Front Facing. Sew on the inner button.
