Draped V-Neck Blouse
Introducing a women's sewing pattern for an elegant button-front blouse featuring a sophisticated draped V-neckline and tailored long sleeves.
When To Wear
This blouse offers a refined versatility, making it perfect for:
- Professional Settings: a polished choice for office wear, meetings, or business casual environments.
- Smart Casual Gatherings: Ideal for luncheons, cultural outings, or stylish daytime events.
- Dinner & Evening Wear: Easily dressed up for a sophisticated dinner or a semi-formal evening out.
Key Design Features
Silhouette: A gracefully flowing, slightly tailored silhouette designed for comfort and elegance.
Neckline: A distinctive V-neckline with soft pleats on the fronts at the shoulder line.
Collar: A stand collar at the back neck only, attached to the yoke.
Closure: Center front button closure finished with facings (no separate placket).
Sleeves: Long set-in sleeves with a topstitched opening at the wrist and buttoned cuffs.
Back: Features a neatly structured back yoke for enhanced fit and design detail.
Hem: A straight hemline, versatile for wearing tucked in or untucked.
Level Of Difficulty
Intermediate. Requires skills in precise pleat formation, collar stand application, and tailored sleeve and cuff construction.
Fabric Recommendations
Achieve the perfect drape and comfort with lightweight blouse fabrics:
- Blouse fabrics made from natural or blended fibers
Additional Supplies
- Fusible interfacing
- 8 buttons
Cutter's Must
If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: hem allowance – 2.0 cm; other seams 1 cm. Attention! First of all, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need. When stitching pieces, pay attention to the notches - they must match!
- From main fabric:
- Back – 1 piece on fold
- Yoke – 1 piece on fold
- Front – 2 pieces
- Stand Collar – 2 pieces
- Center Front Facing – 2 pieces
- Sleeve – 2 pieces
- Cuff – 2 pieces
- From fusible interfacing:
- Stand Collar – 1 piece
- Center Front Facing – 2 pieces
- Cuff – 2 pieces
Sewing Instructions
- Fuse interfacing to the designated pieces.
- Form and secure the pleats on the front pieces. The pleats are pressed away from the center. Place the Center Front Facing and Front right sides together and stitch the edge of the front opening. Clip the allowances, turn the facing to the wrong side, straighten, and press.
- Stitch the outer Stand Collar to the Yoke neckline, clip the allowances, and press towards the stand. Press the lower edge allowance of the inner Stand Collar to the wrong side. Place the Stand Collar pieces right sides together and stitch the upper edge. Start and end the stitching precisely at the marked side edge line.
- Stitch the shoulder seams, sandwiching the Front between the Yoke and the inner Stand Collar. Press the allowances towards the back and serge. Turn the stand collar right side out and stitch the inner Stand Collar in the ditch of the outer stand seam.
- Attach the Yoke to the Back, press the allowances upwards and serge.
- Stitch the side seams, press the allowances towards the back and serge.
- Serge the sleeve edges separately. Stitch the sleeve seam from the armhole to the slit mark, press the allowances open. Topstitch the slit 0.1 cm from the fold. Set the sleeves into the armholes, press the allowances and serge.
- Fold the cuff pieces in half lengthwise, right sides together, and stitch the side edges. Start and end the stitching precisely at the marked cuff attachment seam line. Turn the piece to the right side, press. Attach the outer side of the cuff to the sleeve, turn under the allowance of the inner side of the cuff and stitch it in the ditch of the cuff seam.
- Serge the bottom edge of the garment, press to the wrong side and topstitch.
- On the right front, make buttonholes; on the left, sew on buttons. Make buttonholes and sew on buttons on the cuffs.
