Hooded Tunic Dress with Ruched Hem and Puff Sleeves
Introducing a charming hooded tunic dress sewing pattern, featuring a partial button placket, stylish puff sleeves, distinctive shaped patch pockets, and a playful ruched hem.
When To Wear
This versatile tunic dress is perfect for a relaxed yet stylish look, making it an ideal choice for:
- Casual Daywear: Suitable for comfortable daily activities and relaxed outings.
- Summer Getaways: Ideal for resort wear, vacation strolls, or leisurely outdoor pursuits.
- Transitional Weather: Lightweight yet offers a hood for breezy or slightly cooler days.
Key Design Features
Silhouette: A relaxed, shift-style tunic dress with a gently ballooned lower body, ending above the knee.
Neckline: A functional hood provides coverage, flowing into an open V-neck effect created by the partial front placket.
Closure: A partial front placket features three functional buttons, complemented by a drawstring in the hood.
Sleeves: Short, voluminous puff sleeves, gently gathered at both the shoulder and the sleeve hem.
Pockets: Distinctive shaped patch pockets on the front, featuring gathered or ruched details framing the opening.
Back: Features a clean back with a subtle central tuck/pleat detail originating from a back yoke.
Hem: A playful ruched hem creates a gentle bubble silhouette, finished with an elasticated band.
Level Of Difficulty
Intermediate. Requires skills in constructing a partial button placket, assembling a hood, creating gathered puff sleeves, and working with elastic for the hem.
Fabric Recommendations
Choose light to medium-weight fabrics with good drape for a comfortable and flowing silhouette:
- Blouse fabrics made from natural or blended fibers
Additional Supplies
- Fusible interfacing
- Elastic thread
- Elastic tape, 1 cm wide
- Cord for hood
- 3 buttons
Fabric & Materials
FABRIC RECOMMENDATIONS: blouse fabrics made of natural or blended fibers. YOU WILL ALSO NEED: fusible interfacing, elastic thread, elastic tape 1 cm wide, cord for the hood, 3 buttons.
CUTTER'S MUST
IF THE PATTERNS HAVE A DOUBLE CONTOUR, THEY INCLUDE SEAM ALLOWANCES. IF THE CONTOUR IS SINGLE, THE PATTERNS DO NOT INCLUDE SEAM ALLOWANCES. SEAM ALLOWANCES: along the longitudinal edges of the placket - 0.7 cm, along the placket opening of the front and yoke - 0.7 cm, along the sleeve hem - 1.5 cm, other seams 1 cm. ATTENTION! FIRST OF ALL, PRINT OUT THE PAPER PATTERNS AND LAY THEM OUT ON THE FABRIC WIDTH (fabric width can be from 90 cm to 150 cm) TO DETERMINE HOW MUCH MATERIAL YOU WILL NEED (do not forget to account for paired and symmetrical pieces). WHEN STITCHING PIECES, PAY ATTENTION TO THE NOTCHES - THEY MUST MATCH!
- From main fabric:
- Back – 1 piece on fold
- Front – 1 piece on fold
- Front yoke – 2 pieces
- Back yoke – 1 piece
- Hood – 2 pieces
- Hood placket – 1 piece
- Welt – 2 pieces
- Small pocket bag – 2 pieces
- Large pocket bag – 2 pieces
- Bottom placket – 1 piece on fold
- Fastening placket – 4 pieces
- Sleeve – 2 pieces
- From fusible interfacing:
- Fastening placket – 2 pieces
Attention! when cutting the front on the fold, carefully make a cut for the fastening from the upper edge of the front to the fold line along the outer line, not reaching the single line by 1.5-2 cm.
Sewing Instructions
- Fold the welt in half lengthwise and mark the fold line on the right side. Mark 2 more lines: at a distance of 2 cm and 5 cm from the fold line. Unfold the welt and stitch along the fold line. Then fold the welt in half lengthwise again, right side out, and stitch 2 lines along the marked lines. Gather only on the stitch near the edge (5 cm from the fold).
- Place the small pocket bag on the front, right sides together, insert the welt between the pieces. The fold of the welt is directed towards the center of the front. Align the edges and stitch the pieces along the pocket opening line. Clip the seams, press open, and overcast. Turn the pieces right side out.
- Gather along the remaining stitches on the welt, forming a semicircle from the welt. Place the front with the small pocket bag on the large pocket bag. Stitch the pocket bags along the outer edge. Overcast and press the seam. Secure the welt and the large pocket bag along the side seam.
- Stitch along the upper edge of the front with loosely tensioned stitches and gather. Attach the yokes to the front. Press the seam towards the yoke and overcast.
- Interface 2 plackets with fusible interfacing. Fold the plackets in pairs, right sides together, and stitch: the left placket along the outer edge to the bottom, the right placket – along the outer edge, simultaneously stitching the bottom edge to the notch (2 cm from the bottom). Seam allowance 0.7 cm. On the right placket, clip the seam allowance at the bottom notch. Turn the pieces right side out and press. On the front, strictly according to the marking, clip the seam allowance for the placket at the corners, not reaching the seam line by 1 mm. Attach the outer parts of the plackets to the front, aligning the notches. Seam allowance 0.7 cm. Turn the plackets to the right side, straighten and press, pressing the seam towards the placket. Turn in the seam allowance on the wrong side of the plackets and baste. Turn the end of the left placket to the wrong side together with the triangle, leave the end of the right placket on the right side. Topstitch along the edges of the plackets, simultaneously attaching the inner edge. On the wrong side, secure the triangle with the end of the left placket. Topstitch the end of the right placket to the front crosswise.
- On the back, create a box pleat according to the marking. Attach the back yoke to the back. Press the seam towards the yoke and overcast.
- Stitch the shoulder seams, press allowances towards the back and overcast.
- Stitch the hood pieces. Press and overcast the seam.
- On the hood placket, interface the buttonhole area. Overcast the buttonhole according to the marking. Fold the placket in half lengthwise, right side out, and press. Unfold the placket, attach the outer edge of the placket to the hood. Press the seam towards the placket. Turn in the inner edge of the placket and topstitch it into the seam of the outer edge.
- Cut a bias binding 4 cm wide for finishing the neckline. (If not ready-made). Fold the bias binding in half lengthwise, right side out, and press. Unfold the binding and press the longitudinal edges towards the fold line. Fold the binding in half and press again. Place the hood on the dress along the neckline, right sides together. From the front side, place the bias binding, unfolded, on the neckline edge, extending the ends by 2 cm. Stitch the hood into the neckline together with the bias binding. Press the seam towards the hood. Turn in the open edge of the bias binding and topstitch it onto the hood, thereby covering the seam of attaching the hood to the neckline. Previously fold the ends of the bias binding inwards under the seam allowance.
- Stitch the sleeve edges, press allowances towards the back and overcast. Set the sleeves into the armholes, matching notches, press allowances and overcast.
- Fold the bottom placket in half lengthwise and mark the fold line on the right side. Mark 4 more lines according to the marking. Unfold the placket and stitch into a ring. Press the seam. Stitch with elastic thread along the fold line, placing the elastic on the wrong side. Then fold the placket in half again, right side out, and stitch 4 lines with elastic thread along the marked lines. Attach the bottom placket to the dress, slightly stretching the edge of the placket. Press the seam upwards and overcast.
- Overcast the bottom edge of the sleeve, press to the wrong side and topstitch, forming a casing. Thread elastic tape through the casing, secure.
- Sew buttons onto the placket (through all layers).
