Button-Front Collared Blouse
Introduce a chic button-front blouse sewing pattern, featuring elegant front pintucks, a refined stand collar, and delicately puffed short sleeves.
When To Wear
This versatile blouse is perfect for a variety of settings, offering both comfort and sophistication:
- Casual Smart Outings: Ideal for lunch dates, weekend brunches, or relaxed gatherings.
- Office & Professional Environments: A polished choice for work, easily paired with tailored trousers or skirts.
- Everyday Elegance: Elevates daily wear with its comfortable fit and refined details.
Key Design Features
Silhouette: A relaxed, straight-cut silhouette designed for comfortable wear.
Neckline & Collar: Features a stylish stand collar transitioning into a soft V-neckline.
Closure: A classic button-front placket extending down the front, secured with six buttons.
Sleeves: Short, gently puffed sleeves gathered at both the shoulder cap and the finished hem for a soft, voluminous effect.
Front Details: Delicate pintucks adorn the front panels, originating from the front yoke and adding subtle texture and drape.
Yokes: Defined front and back yokes provide structural interest and a clean finish.
Back: A clean back panel featuring a distinct back yoke for subtle detail.
Level Of Difficulty
Intermediate. This pattern requires skills in working with pintucks, constructing a stand collar and placket, and managing sleeve gathers.
Fabric Recommendations
Opt for lightweight blouse fabrics with a soft drape to enhance the garment's flow and comfort:
- Blouse fabrics made from natural or blended fibers
- Chiffon
- Silk
Additional Supplies
- Fusible interfacing
- 6 buttons
- Bias binding
Fabric & Materials
Fabric recommendations: Blouse fabrics made from natural or blended fibers. Chiffon, silk. YOU WILL ALSO NEED: fusible interfacing; 6 buttons; bias tape. IF THE PATTERNS HAVE A DOUBLE CONTOUR, SEAM ALLOWANCES ARE INCLUDED. IF THE CONTOUR IS SINGLE, SEAM ALLOWANCES ARE NOT INCLUDED. SEAM ALLOWANCES: all seams 1 cm. Hem allowance for the bottom edge of the garment – 2 cm. Hem allowance for the bottom edge of the sleeve – 0 cm. ATTENTION! FIRST, PRINT OUT THE PAPER PATTERNS AND LAY THEM OUT ON THE FABRIC WIDTH (fabric width can be from 90cm to 150cm) TO DETERMINE HOW MUCH MATERIAL YOU WILL NEED (don't forget to account for paired and symmetrical pieces).
CUTTER'S MUST
WHEN STITCHING PIECES, PAY ATTENTION TO THE NOTCHES - THEY MUST MATCH!
- From main fabric:
- Back - 1 piece on fold
- Back yoke – 2 pieces
- Front – 2 pieces
- Front yoke – 4 pieces
- Sleeve – 2 pieces
- Collar stand — 2 pieces
- Placket – 4 pieces
- From fusible interfacing:
- Collar stand – 1 piece
- Placket – 2 pieces
Sewing Instructions
- Interface the pieces with fusible interfacing.
- Fold the collar stand pieces right sides together and stitch along the outer contour. Start and end the stitching strictly at the marked line of the attaching seam. Clip the allowances at the curves. Turn the finished collar stand right side out and press.
- Fold the back yokes wrong sides together, secure along the edges, and then treat as one piece. Attach the back yoke to the back, overcast the allowance and press it upwards.
- Fold the front yokes wrong sides together, secure along the edges, and then treat as one piece. Form and secure the pleats on the front, directing the depth away from the center. Attach the front yoke to the front, overcast the allowance and press it upwards.
- Fold the plackets in pairs right sides together and stitch the outer edge. Clip the allowances, turn the plackets right side out and press. Attach the outer side of the placket to the front, press the allowances towards the placket. Fold under the edge of the inner placket and topstitch into the attaching seam.
- Stitch and overcast the sleeve seam. Press the allowance towards the back. Along the bottom edge of the sleeve between the marks, sew a basting stitch with loosened upper thread and gather. Bind the bottom edge with bias tape. Along the sleeve cap in the upper part, sew a basting stitch with loosened upper thread and gather. Set the sleeve into the armhole. Overcast and press the allowances.
- Stitch the side and shoulder seams. Overcast the allowances and press them towards the back.
- Attach the outer part of the collar stand to the neckline, press the allowances towards the collar stand. Fold under the open edge of the inner collar stand and topstitch into the attaching seam.
- Overcast the bottom edge of the garment. Press the allowances to the wrong side and topstitch.
- Overcast buttonholes on the right placket. Sew buttons onto the left side of the placket.
