Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#2250
#2252

Draped Blouse with Shoulder Clasp

Pattern #2251

This Minerva sewing pattern creates an elegant women's blouse featuring a beautifully draped front panel, gracefully secured at the shoulder with a decorative clasp. This versatile blouse is a refined option for business casual, evening dinners, or special occasions, offering a sophisticated and fluid silhouette. This intermediate pattern allows you to craft a unique garment to your own measurements or in standard sizes using blouse fabrics with excellent draping qualities.

Tech. Description

Draped Blouse with Shoulder Clasp

An elegant women's blouse pattern featuring a beautifully draped front panel, gracefully secured at the shoulder with a decorative clasp to create a sophisticated and fluid silhouette.

When To Wear

This elegant draped blouse is a versatile choice for occasions requiring sophisticated style:

  • Business Casual: a refined option for office wear or professional gatherings.
  • Evening Dinners & Events: Perfect for a chic and polished look on a night out.
  • Special Occasions: Suited for celebrations, art openings, or upscale social events.

Key Design Features

Silhouette: a relaxed fit with a graceful drape, offering a fluid and flattering profile.

Neckline & Draping: a wide, boat-style neckline transitioning into an asymmetrical draped front panel, creating soft folds across the bodice.

Shoulder Detail: The front drape is artfully gathered and secured at the left shoulder with a decorative clasp and accompanying beads.

Sleeves: Long, set-in sleeves finished with buttoned cuffs.

Back: a clean, unadorned back featuring a center seam and a small keyhole opening at the neckline, secured by a fabric loop and button.

Hem: a straight hemline for a neat finish.

Level Of Difficulty

Intermediate. Requires accurate handling of draping and gathering, precise neckline finishing, and cuff construction.

Fabric Recommendations

Choose fabrics that enhance the drape and flow of the design:

  • Blouse fabrics with excellent draping qualities
  • Natural or blended fibers

Additional Supplies

  • Fusible interfacing
  • 3 buttons
  • 2 beads
  • 1 decorative clasp

Cutter's Must

If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: all seams 1 cm. Hem allowance – 2 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90cm to 150cm) to determine how much material you will need (don't forget to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches - they must match! Attention! Markings on the patterns are made on the right side.

  • From main fabric:
    • Back – 2 pieces
    • Front - 1 piece
    • Cuff – 2 pieces
    • Sleeve – 2 pieces
    • Front neckline facing – 1 piece
    • Back neckline facing – 2 pieces
  • From fusible interfacing:
    • Cuff – 2 pieces
    • Front neckline facing – 1 piece
    • Back neckline facing – 2 pieces

Sewing Instructions

  1. Fuse interfacing to the designated pieces.
  2. Finish the center back raw edge separately. Stitch the center back from the slit mark to the bottom, press seam allowances open.
  3. Stitch with a loosened upper thread along the left shoulder edge of the front and gather. (The main bulk of the gathering is closer to the neckline). Stitch shoulder and side seams, press seam allowances towards the back and finish.
  4. Cut a bias strip 2.5 cm wide and 10 cm long for the loop. Fold the strip in half lengthwise, right sides together, and stitch 0.3 cm from the fold. Trim seam allowances close to the stitching, turn the strip right side out and straighten the loop. Adjust the loop length.
  5. Stitch the shoulder seams of the neckline facings. Press seam allowances open. Finish the outer edge. Place the facing right side down onto the right side of the blouse and stitch the neckline and center back seam, inserting the loop. Clip seam allowances, turn the facing to the wrong side and press. Attach the facing to the shoulder seams. Stitch a securing line 0.1 – 0.2 cm from the edge of the slit.
  6. Finish the sleeve seams separately. Stitch the sleeve seam up to the slit mark, press seam allowances open. Stitch a securing line along the slit at 0.1-0.2 cm. Set the sleeves into the armholes. Finish seam allowances.
  7. Fold the cuff in half lengthwise, right sides together, and stitch the short sides. Trim seam allowances, turn the cuff right side out and press. Attach the outer side of the cuff to the sleeve. Fold the seam allowance of the inner side inwards and topstitch.
  8. Press the hem of the garment to the wrong side by 1 cm, then another 1 cm, and topstitch.
  9. Make buttonholes and sew buttons onto the cuffs and neckline.
  10. Create arbitrary pleats across the mark. Secure the pleats through with beads on both sides, leaving 5-6 cm free. Grommets and a chain can also be used.

Order Pattern

Standard Sizes

Individual Measurements

See all customer makes →
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?