Fitted V-Neck Dress with Piping

Fabric & Materials

Fabric recommendations: dress fabrics made of natural or blended fibers with added elastane. YOU WILL ALSO NEED: a concealed zipper; decorative piping (approximate length indicated on the front pattern piece). IF THE PATTERNS HAVE A DOUBLE CONTOUR, SEAM ALLOWANCES ARE INCLUDED. IF THE CONTOUR IS SINGLE, THE PATTERNS ARE WITHOUT SEAM ALLOWANCES. SEAM ALLOWANCES: all seams 1 cm. Hem allowance - 3 cm. ATTENTION! FIRST, PRINT OUT THE PAPER PATTERNS AND LAY THEM OUT ON THE FABRIC WIDTH (fabric width can be from 90 cm to 150 cm) TO DETERMINE HOW MUCH MATERIAL YOU WILL NEED (do not forget to account for paired and symmetrical pieces). WHEN STITCHING PIECES, PAY ATTENTION TO THE NOTCHES - THEY MUST MATCH! Note! Markings on the patterns are made on the right side.

CUTTER'S MUST

• From main fabric:
  • Back – 2 pieces
  • Right front part – 1 piece
  • Center front part – 1 piece
  • Left front part – 1 piece
  • Sleeve — 2 pieces
  • Back neckline facing – 2 pieces

Sewing Instructions

1. Stitch darts on the front pieces, press allowances upwards.
2. Place decorative piping on the right front piece and stitch. Overlock the allowance and press towards the main piece. Topstitch the allowance onto the main piece.
3. Place decorative piping on the center front piece and secure. Stitch the right and center front pieces together. Overlock the allowance and topstitch onto the center piece. Similarly, attach the left front piece.
4. Stitch darts on the back. Press allowances towards the center. Overlock the center back edges separately. Stitch the center back seam from the zipper mark to the hem. Press allowances open. Insert the concealed zipper.
5. Overlock the outer edges of the back facing. Place the facing and back right sides together and stitch the back neckline. Stitch shoulder seams, inserting the front piece between the back and the facing.
6. Stitch side seams. Overlock allowances and press towards the back.
7. Along the sleeve cap, stitch with loosened upper thread and gather or create arbitrary pleats. Set in sleeves.
8. Place decorative piping on the lower edge of the sleeve and stitch. Overlock allowances and press towards the sleeve. Topstitch the allowance onto the main piece.
9. Overlock the bottom edge of the garment. Press the hem allowance to the wrong side and topstitch.