Men’s Sewing Pattern 6012 – Field Jacket in Classic Utility Style with Angled Welt Pockets & Patch Pockets with Buttoned Flaps
Introducing a digital pattern for the structured jacket with patch pockets, angled welt pockets, and button-front closure – Functional Style with Tailored Utility.
WHEN TO WEAR DESIGN 6012
This versatile jacket combines rugged practicality with refined tailoring, making it suitable for:
- Outdoor City Wear: A stylish layer for transitional seasons.
- Travel & Adventure: Durable structure and practical pocket design.
- Smart Casual Outfits: Works equally well with denim, trousers, or over a shirt.
KEY DESIGN FEATURES
Silhouette: Straight, structured cut with tailored shoulder line.
Closure: Front button placket with medium to large buttons for secure fastening.
Collar: Classic shirt-style collar with structured stand.
Pockets: Two large patch pockets with flaps and buttons, plus two angled welt pockets on the chest.
Sleeves: Long sleeves with buttoned cuffs for adjustability.
Back: Yoke seam across the shoulders for structure and ease.
LEVEL OF DIFFICULTY
Intermediate to Advanced. Involves precision in sewing welt pockets, attaching flaps, and setting structured collar and cuffs.
SEAM ALLOWANCES
No seam allowances by default. If the option to add them at €1 is chosen, pattern will come with seam allowances included.
Please note: A single contour on the pattern pieces means no seam allowances are included. A double contour indicates seam allowances are included.
FABRIC RECOMMENDATIONS FOR MEN’S SEWING PATTERN 6012
- Wool coating or wool blends with structure
- Twill, gabardine, or canvas
- Leather (for a more elevated version)
Recommended lining fabric: lightweight satin or cupro in matching tone.
ADDITIONAL SUPPLIES
- Wool fabric
- Lining fabric
- Fusible interfacing
- Cotton fabric in matching tone for pocket bags
- 8 leather-covered buttons, 22 mm diameter
- 4 leather-covered buttons, 18 mm diameter
- One two-way separating zipper, 64 cm (length may vary depending on size)
Fusible interfacing is applied to collar, pocket flaps, facings, sleeve cuffs, and hem allowance.
CUTTER’S MUST FOR MEN’S SEWING PATTERN 6012
From Main Fabric:
- Back Part – 1 piece
- Front Part 2 pieces
- Yoke – 1 piece
- Upper Sleeve – 2 pieces
- Lower Sleeve – 2 pieces
- Left Front Placket (marked on the pattern as “PLANKA_ZASTEZJKI_LEV_POL) – 2 pieces
- Outer Collar – 1 piece
- Lower Collar – 1 piece
- Collar Stand (marked on the pattern as “STOIKA_VOR) – 2 pieces
- Patch Pocket – 2 pieces
- Patch Pocket Flap – 4 pieces
- Pocket Side Part – 2 pieces
- Pocket Welt – 2 pieces
- Right Front Facing – 2 pieces
- Cuffs – 4 pieces
- Sleeve Facing – 2 pieces
From Cotton Fabric:
- Welt Pocket Bag (marked on the pattern as “MESHKOVINA_KARM) – 4 pieces
- Patch Pocket Lining (marked on the pattern as “PDKL_NKL_KARM) – 4 pieces
From Lining Fabric:
For drafting the lining pattern pieces, use the following patterns with the following modifications:
- Back lining: use Back Part pattern piece shortening it by 2 cm – cut 1 piece.
- Front lining: use Front Part pattern piece shortening it by 2 cm – cut 2 pieces.
- Yoke: use Yoke pattern piece without any modifications – cut 1 piece.
- Upper Sleeve – use Upper Sleeve pattern piece shortening it by 3 cm – cut 2 pieces.
- Lower Sleeve – use Lower Sleeve pattern piece shortening it by 3 cm – cut 2 pieces.
From Fusible Interfacing:
- Hem allowances of Fronts, Back, and Sleeves
- Outer and Lower Collars
- Collar Stand
- Left Front Placket
- Right Front Facing
- Half of Pocket Welt
- Patch Pocket
- Patch Pocket Flap
IMPORTANT INFORMATION
Before cutting your fabric, print and lay out the paper patterns according to fabric width (90–150 cm) to determine yardage. Be sure to include paired and symmetrical pieces. If using checked fabric, carefully align the pattern pieces to ensure continuity across seams.
MEN’S SEWING PATTERN 6012 FOR 3D DESIGNERS, CONTRACTORS, AND ADVANCED SEWISTS
DXF AAMA – For 3D designers, fully compatible with most 3D fashion software.
PLT – For contractors, enabling precise cutting layouts.
PDF – Print-at-home format for advanced sewists.
CUSTOM FIT OPTIONS WITH INDIVIDUAL MEASUREMENTS OR ASTM SIZES
Pattern 6012 offers both custom sizing based on individual measurements and ASTM US standard sizing:
- Chest: 35 cm to 170 cm
- Low Hip: 35 cm to 190 cm
The drafting software tailors the pattern to your specific dimensions, ensuring a perfect fit at the shoulders, chest, and sleeve length—minimizing alterations and ensuring professional results.
CHECK OUT PANTS PATTERN 6001
