Classic Zip-Up Hoodie
Introducing a versatile sewing pattern for a men's classic zip-up hoodie, featuring an adjustable drawstring hood and a practical front kangaroo pocket.
When To Wear
This hoodie is perfect for casual and comfortable wear, making it an excellent choice for:
- Everyday Comfort: Ideal for relaxing at home or running errands due to its soft fabric and easy fit.
- Layering: Suitable for adding a casual layer over a t-shirt in cooler weather.
- Active & Leisure Wear: Great for light outdoor activities, walks, or casual social gatherings.
Key Design Features
Silhouette: a comfortable, slightly relaxed fit with a straight body and hem.
Neckline: Features an attached hood with a drawstring for adjustability.
Closure: a full-length front zipper extends from the hem to the neckline.
Sleeves: Long set-in sleeves with a clean finished hem.
Pockets: a spacious kangaroo pocket is integrated into the front, centered over the zipper.
Back: a clean, unadorned back panel.
Hem: a straight bottom hem, finished for a neat appearance.
Level Of Difficulty
Intermediate. Requires experience working with knit fabrics, zipper insertion, and constructing a hooded garment with a drawstring casing and buttonholes.
Fabric Recommendations
Choose medium to heavy-weight knit fabrics with some stretch for comfort and drape:
- Fleece
- Soft, thick knit fabric (such as French terry or sweatshirt fleece)
Additional Supplies
- Fusible interfacing
- Drawstring for hood (approximate length indicated on pattern)
- Zipper (length indicated on pattern)
- Bias tape, 4 cm wide
- Cord ends for drawstring
Cutter's Must
If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: Hem allowance for the bottom of the garment and sleeves – 2 cm. Outer edge allowance for the hood 2 cm. Hem allowance for the bottom of the facing – 0 cm. Pocket opening allowance – 2 cm. All other seams 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90cm to 150cm) to determine how much material you will need (do not forget to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches - they must match!
- From main fabric:
- Front – 2 pieces
- Back - 1 piece
- Sleeve - 2 pieces
- Pocket – 2 pieces
- Hood – 2 pieces
- Facing – 2 pieces
Sewing Instructions
Tip: Cut pieces from knit fabrics are stitched with a special elastic or narrow zigzag stitch. When serging, trim allowances to 0.6 – 0.8 cm. The hem allowance is topstitched with a twin needle to maintain elasticity.
- Reinforce the areas for buttonholes on the hood with fusible interfacing.
- Serge the pocket opening. Fold inwards and topstitch. Serge and fold the top, bottom, and side allowances of the pockets to the wrong side and press. Mark the pocket placement on the front and topstitch the pocket.
- Stitch the shoulder seams of the hoodie. Press the seams towards the back and serge.
- Insert the zipper starting from the top down to the zipper notch.
- Fold the bias tape in half lengthwise, right side out, and press. Place the hood pieces right sides together. Lay the bias tape onto the hood edge and align the edges. Stitch the hood pieces together with the bias tape. Fold back the bias tape and topstitch it onto the hood, thereby covering the seam of the hood pieces. Serge the buttonholes. Serge the outer edge of the hood, fold, and topstitch to the wrong side. Cut open the buttonholes and thread the cord through the casing.
- Serge the outer and top edge of the facing.
- Fold the bias tape in half lengthwise, right side out, and press. Place the hoodie and hood pieces right sides together. Lay the facing onto the hood, right side in. Lay the bias tape onto the back hood edge (the tape should extend onto the front by 1.5 – 2 cm) and align the edges. Stitch the hood, hoodie, and facing pieces together with the bias tape. Fold back the bias tape and topstitch it onto the hoodie, thereby covering the hood insertion seam.
- Secure the top edge of the facing along the shoulder seam.
- Set the sleeves into the open armhole. Serge the seam. Stitch the side seam and sleeve seam. Serge the seam and press towards the back.
- Serge the bottom of the garment.
- Fold the bottom hem allowance inwards and topstitch.
- Serge the sleeve hem, press to the wrong side, and topstitch.
