CUTTER'S MUST
- MAIN FABRIC:
- FRONT PANEL - 1 QTY
- BACK PANEL - 1 QTY
- SLEEVE - 2 QTY
- COLLAR - 1 QTY
Sewing Instructions
TIP: To keep the fabric stretchy in the areas of the finished seams, stitch the cut pieces with a narrow zigzag or special stretchy stitch. To keep the bottom edge stretchy, overcast the hem with an overlock stitch, then attach it using a twin needle. The same applies to finishing other edges of the garment that should not lose elasticity. These recommendations do not apply to industrial production.
- ASSEMBLE THE TOP. Attach the SLEEVES to the FRONT PANEL and BACK PANEL. Stitch the side seams and SLEEVE seams, leaving the slit areas unstitched.
- Stitch the COLLAR into a ring. Fold in half. Attach the COLLAR to the neckline, stretching the COLLAR edge and positioning the COLLAR seam at the left base of the neck. Topstitch the COLLAR attachment seam with a STRETCHY stitch.
- Finish the slit with a TRIM STRIP, forming an angle with the TRIM STRIP at the top of the slit.
- Overcast and press up the hem of the bottom and SLEEVES. Topstitch the bottom of the garment, the slits, and the bottom of the SLEEVES.
- Press the finished T-shirt.
