V-Neck Flutter Sleeve Tie Back Blouse
Introducing a delicate blouse sewing pattern featuring a deep V-neckline, romantic flutter sleeves, a wide satin waistband, and a charming tie-back detail.
When To Wear
Designed for effortless elegance, this versatile blouse is perfect for:
- Casual Chic: Pair with jeans or a skirt for an elevated everyday look.
- Summer Gatherings: Its lightweight fabric and airy sleeves are ideal for warmer weather events and daytime occasions.
- Date Night & Evening Out: The V-neck, lace trim, and tie-back create a romantic and stylish impression.
Key Design Features
Silhouette: a flattering design with a relaxed bodice that gently gathers into a defined, wide waistline, leading to a straight hem.
Neckline: a deep V-neckline, elegantly trimmed with delicate lace for a touch of sophistication.
Sleeves: Wide, short flutter sleeves with a graceful drape and a subtle split detail on the shoulder.
Waist: Accentuated by a wide, contrasting satin waistband that cinches the natural waist.
Back: Features a V-shaped opening at the upper back, secured with a functional and decorative tie closure at the waist.
Closure: a charming self-fabric tie at the back waist allows for adjustable fit and adds a distinctive detail.
Length: Standard blouse length, designed to fall gracefully to the hip.
Level Of Difficulty
Intermediate. Requires confident handling of delicate fabrics, execution of narrow hems, gathering techniques, and precise attachment of lace details.
Fabric Recommendations
Choose lightweight, fluid fabrics with good drape:
- Thin chiffon fabrics made from natural or blended fibers
Additional Supplies
- Lace, 2.5 cm wide
- Satin companion fabric (for waistband and front yoke construction)
Cutter's Must
- From chiffon:
- Upper back – qty 2
- Lower back – qty 1
- Upper front – qty 2
- Lower front – qty 1
- Front sleeve – qty 2
- Back sleeve – qty 2
- From satin:
- Waistband – qty 2
- Front Yoke – qty 1
- From lace:
- Lace trim – qty 2
Tip: When serging, trim side, shoulder, and sleeve insertion seam allowances with an overlocker to 0.5-0.7 cm.
Sewing Instructions
- Finish the neckline edge of the upper front with a 'French seam' (also known as a 'Moscow seam'). To do this, press the seam allowance to the wrong side by 1.5 cm, stitch 0.1-0.2 cm from the fold. Trim the seam allowance close to the stitching. Fold the seam allowance again and stitch along the previous line. Press the seam.
- Finish the lower edge of the yoke with a 'French seam'. Attach the yoke to the lower front along the upper and side edges.
- Stitch with loosely tensioned stitches 0.5 cm from the edge along the lower edge of the upper front. Gather between the notches. Stitch the upper and lower front PANELs together with the yoke. Note: Align edges from the side seam; the upper front does not reach the corner of the lower by 2 cm. Press the seam downwards and serge.
- Stitch the lace trim pieces along the bias edge. Press the seam open and serge. On the upper front, mark a line 0.5 cm from the neckline edge. Place the lace trim edge along the marked line, aligning the corner and the mark on the yoke. Topstitch the lace.
- Fold the waistband pieces in half lengthwise, right sides together, and stitch the long and bias edges. Turn the waistband right side out and press.
- Finish the neckline edge of the back with a 'French seam'. Stitch the upper and lower back PANELs. Press the seam downwards and serge.
- Stitch the shoulder and side edges, inserting the waistband into the side seam. Serge and press the shoulder and side seams towards the back.
- Stitch the lower edge of the sleeve. Serge the seam and press towards the back. Serge the sleeve hem and the sleeve shoulder edges from the cap to the sleeve hem with a narrow rolled hem. Stitch the section of the sleeve shoulder seam from the cap to the notch.
- Set the sleeve into the armhole. Serge the seam and press.
- Serge the lower edge of the top with a narrow rolled hem.
